ARTRC

 

#199170 HUDY Exclusive Transmitter Bag

With your transmitter being one of the single most important pieces of your racing equipment, it deserves all the protection it can get when traveling to and from races. To keep your transmitter safe and protected use the stylish HUDY Exclusive Transmitter Bag. Well padded to withstand the rigors of travel and with a spacious interior, the transmitter bag safely protects even the large computer radios on the market today. With most racers carrying two transmitters to a race the HUDY Transmitter Bag is spacious enough to comfortable store two transmitters. To prevent the transmitters form moving during transport, an elastic safety strap inside the bag on the rear wall can be used to securely hold the transmitters. Large dual zippers make access quick and easy. Strong lightweight nylon gives durability, and tough heavy-duty stitching is used throughout the bag’s construction. A wide, rubber-coated handle strap makes carrying super easy and comfortable. The clear-plastic pocket allows you to display an ID card so you can quickly identify your transmitter bag. Two exterior straps at the rear of the bag allow you to mount the transmitter bag to most widely-used car carrying bags. A special wide elastic strap (also on the exterior) lets you fit the transmitter bag onto your hand luggage when traveling. Manufactured in Europe from premium European high-quality materials, everything is premium on this bag. Highest-quality materials combined with expert workmanship ensure the durability, performance, and long life of this bag. For a unique and stylish look to separate yourself from the crowd, the HUDY Exclusive Transmitter Bag features full-colored stylish HUDY graphics emblazon on the bag exterior.

Posted by ARTRC

#199160 HUDY Exclusive Starter Box Bag

• Premium Exclusive Bag
• Cool & Stylish Grafics
• High Quality European Materials
• Comfortable Paded Handle
• Padded Walls
• On-Road or Off-Road Starter Box
• Full Color Printing


Well padded to withstand the rigors of travel and with a spacious interior, the starter box bag safely protects your nitro car starter box. Large dual zippers make access quick and easy. Strong lightweight nylon gives durability, and tough heavy-duty stitching is used throughout the bags construction. A wide, rubber-coated handle strap makes carrying super easy and comfortable. The clear-plastic pocket allows you to display an ID card so you can quickly identify your starter box bag.


Manufactured in Europe from premium European high-quality materials, everything is premium on this bag. Highest-quality materials combined with expert workmanship ensure the durability, performance, and long life of this bag. For a unique and stylish look to separate yourself from the crowd, the HUDY Exclusive Starter Box Bag features full-colored stylish HUDY graphics emblazon on the bag exterior.











--------------------------------------------------------------------------------


http://artrc.net

Posted by ARTRC

상품코드	비 고	제   품   이   름	권장가격	웹 링크
10 2003		HUDY EXCELLENT TIRE TRUER - FULLY AUTOMATIC 1/8, 1/10, 1/12 - FULL OPTION	598,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1485
10 2353		WHEEL ADAPTER 1/10 - ALL TOURING CARS	46,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1492
10 2362		WHEEL ADAPTER 1/8 - SERPENT, MUGEN, KYOSHO, MOTONICA, SHEPHERD	46,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1494
10 4140		HUDY ENGINE BREAK-IN BENCH	158,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3486
10 5500	신제품	HUDY UNIVERSAL TIRE BALANCING STATION	58,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4820
10 5510	신제품	WHEEL ADAPTER FOR 1/8 OFF-ROAD CARS, TRUGGY & RALLY GAME	36,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4821
10 5520	신제품	WHEEL ADAPTER FOR 1/10 TOURING CARS	36,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4822
10 6210		HUDY GRAPHITE GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3487
10 6211		HUDY DIFF GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3488
10 6220	신제품	HUDY BEARING GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4823
10 6221	신제품	HUDY BEARING GREASE - EXTRA	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4824
10 6222	신제품	HUDY BEARING GREASE - PREMIUM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4825
10 6230		HUDY BEARING OIL	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3571
10 6231	신제품	HUDY ONE-WAY LUBE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4826
10 7570		HUDY 17MM OFF-ROAD WHEEL NUT TOOL	45,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3139
10 7581		WRENCH-GLOWPLUG / CLUTCHNUT 10 MM - LONG	29,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1462
10 7600		REAMER FOR LEXAN BODIES 0-18 MM + COVER	44,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1463
10 7610		EXHAUST SPRING / CASTER CLIP REMOVER	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1464
10 7634		ARM REAMER + REPL. TIP 4.0  x 120 MM	18,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3377
10 7701		CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8, 1/10 (2)	32,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1469
10 7711		CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8, 1/10 CARS (20 MM)	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1471
10 7850	신제품	HUDY PERSONAL RACING DISPLAY	75,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4827
10 8201		FLAT SET-UP BOARD FOR 1/10	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1476
10 8210		PLASTIC SET-UP BOARD DECAL FOR 1/8, 1/10	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1477
10 9305		UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 TOURING CARS	230,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1483
11 1540		ALLEN WRENCH + REPL. TIP 1.5 x 120  MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1415
11 2041		REPLACEMENT TIP # 2.0 x 120 MM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1352
11 3040		ALLEN WRENCH + REPL. TIP 3.0 x 120 MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1418
11 4040		ALLEN WRENCH + REPL. TIP 4.0 x 120 MM	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1419
11 5040		ALLEN WRENCH + REPL. TIP 5.0 x 120 MM	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1420
11 5041		REPLACEMENT TIP # 5.0 x 120 MM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1358
12 6340		ALLEN WRENCH + REPL. TIP .063 x 120  MM (1/16")	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1425
12 6349		PT ALLEN WRENCH + REPL. TIP .063 x 120  MM (1/16")	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1397
12 9340		ALLEN WRENCH + REPL. TIP .093 x 120  MM (3/32")	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1427
12 9349		PT ALLEN WRENCH + REPL. TIP .093 x 120  MM (3/32")	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1399
13 2040		ALLEN WRENCH + BALL REPL.TIP 2.0 x 120 MM	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1428
13 9340		ALLEN WRENCH + BALL REPL.TIP # .093 x 120 MM	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1434
13 9341		REPLACEMENT TIP BALL # .093 x 120 MM  (3/32")	14,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1375
16 3029		PT PHILLIPS SCREWDRIVER  3.0 x 80 MM	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1511
16 4040		PHILLIPS SCREWDRIVER  4.0 x 120 MM / 18MM (SCREW 2.9 AND M3)	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1443
16 5000		PHILLIPS SCREWDRIVER  5.0 x 120 MM / 22MM (SCREW 3.5 AND M4)	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1444
17 0050		SOCKET DRIVER 5.0 MM	26,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1448
17 0059		PT SOCKET DRIVER 5.5 MM	15,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1514
17 0104		SOCKET DRIVER 1/4" (6.35 MM)	28,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1453
17 0109		PT SOCKET DRIVER 1/4" (6.35 MM)	15,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1518
17 1132		SOCKET DRIVER 11/32" (8.731 MM)	28,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1457
17 1139		PT SOCKET DRIVER 11/32" (8.731 MM)	17,800원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1522
19 0150		SCREWDRIVER & PHILLIPS SET - 5 PCS.	105,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1410
19 0170		SOCKET DRIVER METRIC SET - 6 PCS.	135,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3141
19 0210		BASIC SET - 9 PCS.	195,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1413
19 9010	신제품	HUDY RC TOOLS BAG	98,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4828
19 9100	신제품	HUDY 1/10 TOURING CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION	198,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4829
20 9071		HUDY PIT TOWEL 1200 x 730	27,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1329
20 9103		HUDY STICKERS FOR BODIES	3,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1334
30 0013		XRAY T2'009 - EU RUBBER-SPEC 6-CELL EDITION - 1/10 LUXURY ELECTRIC TC	598,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4757
30 0102		XRAY T2R PRO - 1/10 RACING ELECTRIC TC	458,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4818
30 1128	신제품	T2'009 CHASSIS 2.5MM GRAPHITE - 6-CELL - RUBBER-SPEC	154,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4830
30 2022		T2 ALU UPPER CLAMP FOR BULKHEADS	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2432
30 2044		T2 LOWER SUSPENSION HOLDERS (2+2+2)	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2439
30 2253		T2 COMPOSITE STEERING BLOCK - HARD - FOAM-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3578
30 2363		T2 COMPOSITE C-HUB RIGHT - 4° DEG. - MEDIUM - RUBBER-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3579
30 2364		T2 COMPOSITE C-HUB LEFT - 4° DEG. - MEDIUM - RUBBER-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3580
30 3163		T2'008 REAR SUSPENSION ARM - HARD - RUBBER-SPEC - 1-HOLE	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3584
30 3482		T2 ANTI-ROLL BAR REAR 1.2 MM	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2617
30 5082		DIFF WASHER 17 x 23 x 1 (2)	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2631
30 5121		MULTI-DIFF LOCKING AXLE - HUDY SPRING STEEL	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2638
30 5325		EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 50MM - HUDY SPRING STEEL™ (1)	65,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4744
30 5326	신제품	ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM	35,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4831
30 5327	신제품	EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 52MM - HUDY SPRING STEEL™ (1)	65,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4832
30 5328	신제품	ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 50MM	35,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4833
30 5329	신제품	DRIVE SHAFT - 32 MM - SPRING STEEL (2)	39,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2660
30 5340		T2 DRIVE AXLE - HUDY SPRING STEEL	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2661
30 5341	신제품	T2 DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™	26,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4834
30 5350		T2 ALU WHEEL HUB (2)	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2662
30 5380		T2 ALU WHEEL SHIM OFFSET 0.75MM (2)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2666
30 5390	신제품	ECS DRIVE SHAFT PIN 1.5 x 8 - V2 (2)	10,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4745
30 5391	신제품	ECS DRIVE SHAFT PIN 1.5 x 9 WITH FLAT SPOT (2)	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4759
30 5431		HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 507 MM	16,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2667
30 5439	신제품	HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 423 MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2668
30 5442		HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 180 MM	15,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2669
30 5577		T2'008 FIXED PULLEY 20T (2)	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3674
30 7214		FRONT WISHBONE PIVOT PIN LOWER - SPRING STEEL  (2)	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2709
30 8306	신제품	XRAY T2'008 ALU SHOCK ABSORBER-SET (2)	52,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4761
30 8374		XRAY SPRING-SET C = 2.4 (2)	12,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3682
30 8377		XRAY SPRING-SET C = 3.0 (2)	12,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3616
35 0003		XRAY XB808 -  LUXURY 1/8 NITRO OFF-ROAD CAR	798,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3893
35 1200		FRONT & REAR BUMPER - V2	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1840
35 2002		XB808 DIFF BULKHEAD BLOCK SET FRONT/REAR - V2	18,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3959
35 2087		XB808 FRONT ALU BRACE SWISS 7075 T6 (5MM) - HARD COATED	53,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4586
35 2093		XB808 FRONT ALU SHOCK TOWER SWISS 7075 T6 (3MM) - HARD COATED	50,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4587
35 2664		XB808 COMPOSITE STEERING BALL JOINT 6.8MM (2)	6,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3980
35 3086		XB808 ALU REAR BRACE SWISS 7075 T6 (5MM) - HARD COATED	53,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4620
35 3515		REAR WING - BLACK	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3694
35 5050		CENTER DIFF SPUR GEAR 46T	37,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2009
35 5101		XRAY XT8 ACTIVE DIFF™	159,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3720
35 8513		CLUTCH BELL 13T	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2068
35 8531		FLYWHEEL	13,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2071
35 8585		CLUTCH SPRINGS - HARD (3)	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1807
35 8600		FUEL TANK 120CC - SET	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2078
35 8800		AIR FILTER SET	13,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2088
35 8840		AIR FILTER FOAM & OIL	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2091
35 8901		COMPOSITE FUEL FILTER SET	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2093
35 8950		SILICONE TUBING 1M (2.4 x 5.5MM)	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2095
35 9050		CLUTCH BELL BALL-BEARING MR105ZZ 5x10x4 (2)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2002
37 0000		XRAY XII - 1/12 PAN CAR	398,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4819
38 9163		XRAY MICRO MOTOR 370 SUPERSIZE	30,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2960
39 7232		XRAY 1/10 TOURING CARRYING BAG - EXCLUSIVE EDITION	178,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4747
39 7324	신제품	XRAY T2'009 STICKER FOR BODY - WHITE	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4835
90 1405		HEX SCREW SB M4x5  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2183
90 2205		HEX SCREW  SH M2x5  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2186
90 2306		HEX SCREW SH M3x6  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2188
90 2308		HEX SCREW SH M3x8  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2189
90 2310		HEX SCREW SH M3x10  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2190
90 2312		HEX SCREW SH M3x12  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2191
90 2318		HEX SCREW SH M3x18  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2194
90 2322		HEX SCREW SH M3x22  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2196
90 2330		HEX SCREW SH M3x30  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2197
90 3308		HEX SCREW SFH M3x8  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2202
90 3310		HEX SCREW SFH M3x10  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2203
90 3312		HEX SCREW SFH M3x12  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2204
90 3412		HEX SCREW SFH M4x12  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2207
91 0258		SCREW PHILLIPS M 2.5x8  (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2305
93 0020		BALL STEEL 2.4MM  (24)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2307
30 9072	신제품	Tungsten Carbide Axial Thrustbearing F3-8 3x8x3.5 - PRO	19,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4836
94 0510		HIGH-SPEED BALL-BEARING 5x10x4 RUBBER SEALED  (2)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2320
94 1015		HIGH-SPEED BALL-BEARING 10x15x4 RUBBER SEALED  (2)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2323
96 3030	신제품	CONE WASHER ST 3x8x0.5  (10)	10,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2336
97 0050		O-RING 5x1  (10)	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2358
98 0212		PIN 2x11.6 (10)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1735

Premium-quality exclusive tool bag with a super-modern look with cool, stylish and full-color graphics around the bag. High-quality European materials and craftsmanship. Ideal size for carrying your RC tools and accessories; holds up to 30 tools.

Super-strong stretchy Xylan holds the tools and will keep its stretchability for a long time. The inside walls feature a strong plastic sheet sewn for reinforcement, ensuring that even when the bag is fully loaded with tools it will not twist or bend. A heavy-duty lockable zipper is included, as well as a strong yet super-soft spongy handle for comfortable handling.

• Premium, exclusive tool carrying bag
• Super modern and outstanding never seen before look
• Cool, stylish and full-color graphics around the bag
• High-quality European materials
• Manufactured exclusively in Slovakia, Europe
• Ideal size for carrying all the tools and accessories
• Holds up to 30 tools
• Easy to organize tools inside the box
• Super-strong stretchy xylan holds the tools and will keep its stretchy characteristics long time
• Inside walls a strong plastic sheets are sewn up to reinforce the walls of the carrying bag to ensure when the bag is fully loaded with tools it will not twist or bend
• Heavy-duty lockable zipper
• Strong yet super-soft spongy handle for comfortable handling

CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Fits XRAY T2’009.

Knowing that every small detail impacts the handling and performance of a high-performance car, XRAY CNC-machines every chassis in-house using the most modern German milling machines… fully robotically operated and controlled to ensure that every chassis meets the tightest manufacturing tolerances.

XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.

The ECS drive shaft equalizes the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise and easier to drive.

With the new ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased and cornering speed and smoothness increases noticeable.

The ECS drive shaft comes factory pre-assembled for quality checking, but it is not immediately ready to use. Before using follow the instruction manual.

NOTE: To use the ECS drive shafts you need to use the front C-hubs V2 with the larger opening. The C-hubs V2 were included in all T2'008 kits, so owners of the T2, T2'007 and T2R must purchase the C-hubs V2 separately.

HUDY Bearing Grease is an extended-life multipurpose lubricant for ball bearings and is a direct replacement for the grease delivered in ball-bearings. HUDY Bearing Grease combines an optimized additive package with proven synthetic-base oils and a robust lithium complex thickener system to provide outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions. Features:
• Excellent resistance to water and seal compatibility
• Multi-service capability with reduced wear
• Very low running torque values
• Specially designed for ball-bearings

HUDY Bearing Grease Extra is an advanced lubricant incorporating both extreme pressure additives and finely dispersed graphite for load carrying. The Extra lubricant is an advanced replacement for the standard bearing grease. The HUDY Bearing Grease Extra is formulated to have excellent adhesion and resistance to “fling-off” under extreme conditions and provides outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions.
Features:
• Excellent resistance to water and seal compatibility
• High level of protection against wear and scuffing
• Very low running torque values
• Specially designed for ball-bearings.

HUDY Bearing Grease Premium is a supreme-performance lubricant for extreme overload conditions in highly-loaded bearings. The grease combines the unique features of synthetic-base fluids with those of a high-quality lithium complex thickener. The wax-free nature of synthetic fluids and low coefficient of friction provide very low running torque. This grease reduces operating temperatures in the load zone of spherical roller- and ball-bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The grease has a high level of chemical stability and is formulated with special additive combinations to provide excellent protection against wear, rust and corrosion at high and low temperatures.

Features:
• Excellent protection at high temperatures and low torque
• Outstanding high-temperature and low-temperature performance
• Reduced downtime and maintenance costs because of reduced wear, rust and corrosion
• Excellent protection against wear, rust, and corrosion
• Extended service life with longer intervals between re-lubrication and improved bearing life
• Excellent thermal stability and oxidation resistance
• Low traction coefficient
• Retains excellent grease performance in hostile aqueous environments
• Outstanding structural stability in the presence of water
• Helps resists viscosity increase at high temperatures to maximize re-lubrication intervals and bearing life.

In the world of the small, agile, and super-fast 1/12 pancars, winners are separated from the rest of the pack sometimes by only fractions of a second. With simpler designs compared to larger touring cars, attention to detail is paramount. The new XRAY XII may at first glance seem like a simple and traditional design, but that’s where the similarities end. The XRAY XII achieves a state of perfection by focusing on well thought-out refinements to create a car that is easy to drive, work on, and adjust. Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum and highest-grade graphite are the signature of XRAY and the XII has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the XII achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together. In a world where overly-complicated designs hinder rather than enhance, the XII stands alone and ahead as the best performing out-of-the-box racer. See it. Feel it. Drive it. Dipl. Eng. Juraj Hudy Chief Engineer, XRAY

Main features:

• All-new XRAY 1/12 pan-car with authentic 100% self-developed XRAY parts, designed and manufactured parts by XRAY in Europe • Legendary XRAY premium design, workmanship & material quality and unmatched attention to the finest details • Conventional and proven 1/12 platform with redesign by legendary RC designer and XRAY’s award-winning Chief Designer - Ing. Hudy Juraj • Simple yet effective and proven design, well thought-out details, unmatched precision of all small details • Specially designed and optimized for brushless and brushed motors • High-competition design with focus on ultra-low weight, resulting in super-lightweight construction. • Optimized for indoor carpet racing as well as outdoor asphalt racing • CNC-machined chassis from custom-manufactured 2.0mm high-grade graphite material with specially-designed compound for carpet racing and asphalt racing; for extra-high grip carpet tracks an optional stiff chassis will be available • Chassis layout optimally designed to give sufficient stiffness for excellent handling, but flexible enough to generate sufficient grip and traction • Super-narrow chassis design and layout with all weight centralized along the centerline • Chassis and rear pod features pre-drilled centerline holes for optimum weight balance adjustment using HUDY Balancing Tool #107880

• Composite front chassis protectors protect the front of the chassis in crashes • Robust body posts with fully-adjustable body holders; optional super fine +1 or +2mm body backstops available optionally for even more super-fine body height adjustment. • High-competition, fully-adjustable front suspension with super-clean design of all composite suspension parts • All composite parts manufactured by XRAY using premium self-developed composite mixtures which guarantee sufficient flex of the suspension parts yet hard enough to withstand heavy crashes • Highest quality of all composite parts ensures super-precise fitment, easy assembly, and smooth operation of all parts • Lower fixed suspension arms feature embedded self-locking nuts for easy assembly, prevents bending in the suspension and unwanted chassis tweak • Fast & easy front caster adjustment via included clips • Reactive caster adjustment of preset 2.5°, 5.0° or 7.5° via easy-to-change eccentric bushings • Super-tiny yet robust steering blocks with uniquely-designed axles which prevent axle spinning while tightening the wheel locking nuts • Additional front axle shims for adjustable front track-width • Ultra-precise wheel axles CNC-machined from premium HUDY Spring Steel™ additionally hardened and hand ground for precision fitment • Pivoting front suspension with super-smooth hardened steel kingpins supported by soft springs; optional medium, hard, and extra-hard suspension springs available as options • Front ride height adjustment and front track-width adjustment via shims • High-precision, HUDY Spring Steel™ pivot balls ensure super-fine movement of the front suspension under compression • Graphite front upper brace between front suspension pins provides medium stiffness; aluminum adjustable front brace available as an option • Front upper 3mm adjustable HUDY Spring Steel™ camber turnbuckles are lightweight yet can withstand heavy crashes • Lightweight composite servo mounts with two different positions allow fitment of most popular micro and mid-size steering servos • Tiny yet robust servo saver with easy Ackermann adjustment via shims mounted below pivot balls • Tiny, ultra-flat composite battery holders keep batteries in place; multiple placement options (front, rear) for different chassis weight balance • Tiny lightweight antenna mount secures lightweight yet strong molded fiberglass rollover antenna, also doubles as the shock absorber mount

• XRAY micro shock with similar design as it’s “big brother” counterpart in XRAY’s successful T2 touring car platform • Fully-adjustable shock with aluminum shock body hard-anodized for ultra durability and additionally black coated for stylish look • Fine-threaded shock body for quick and easy shock spring preload adjustment • Tiny thin shock membrane gives super-smooth dampening characteristics • Super-soft silicone shock O-ring for smooth operation while preventing oil leakage • Ultra-finely finished shock shaft with precise-molded composite shock piston ensures optimum shock oil flow and smooth shock absorber action • Simple yet smart shock construction allows for quick and easy shock-length adjustment for downstop adjustment • Shock position adjustment via shimming of HUDY Spring Steel™ shock ball studs • Rear suspension with conventional rear pod is adjustable via fiberglass T-bar, providing extremely easy assembly and tuning while being very effective and give the highest competitive performance • T-bar included for carpet & asphalt racing; optional T-bars in different thickness available for super-fine tuning and adjustment • Unique T-bar mounting methods allow for two different settings: • Club race setting – direct mounting of T-bar to chassis without front pivotball gives limited adjustment possibilities (recommended for beginner drivers) • Pro race setting – pivotball mounting of T-bar to chassis for more advanced adjustment possibilities (recommended for advanced drivers) • Precision T-bar pivot balls machined from ultra-strong HUDY Spring Steel™ additionally hardened for perfect shape and smoothness • Adjustable T-bar setscrews for adjusting chassis tweak • Two different T-bar tweak screw positions for adjusting responsiveness • Premium-grade graphite upper deck provides solid attachment for shock absorber to rear pod

• Special 1-piece aluminum damper pad holder is mounted independently from the rear body mount to ensure independent and equal left-right movement of rear pod • Spring-loaded upper and lower damper pads provide addition control of rear pod movement; grease-retaining grooves in damper pads ensure equal and consistent friction characteristics • Rear body posts are mounted to the chassis via a wide independently-mounted graphite holder, ensuring body downforce is properly transferred to the chassis • Compact and ultra-lightweight rear pod constructed from high-strength aluminum bulkheads, rear aluminum brace, and thin but strong high-grade graphite plates • Rear pod bulkheads CNC-machined from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look. • Rear bulkheads are strategically machined to reduce weight to minimum while retaining strength • Super-easy motor top access • Rear pod accommodates brushed or brushless motors • Eccentric composite bushings included for ultra-fine rear ride height adjustment • Aluminum rear hubs machined from lightweight aircraft aluminum, specially lightened and black coated for stylish look • Super-lightweight rear axle made from 1-piece high-grade graphite rod, additionally precision hand ground to eliminate vibration and run-out • Rear differential features high-grade precision carbide balls for spur gear, hardened and precision-ground D-steel shims, and premium carbide 3x8mm axial thrustbearing • Lightweight rear wheel mounting screws for reduced rotating weight • Rear left aluminum wheel hub with center-balanced clamping mounting system, ensures secure mounting while eliminating vibration and run-out • Precision-molded spur gear made from XRAY's exclusive composite material, ensuring true running, super-quiet operation, super lightness and robustness for handling powerful motors • Easy rear track-width adjustment via included shims • Rear pod weight balance can be easily adjusted via shims between motor and bulkhead • Optimized weight balance when using brushless motors; when using lighter brushed motors the weight balance can be adjusted by shimming motor in the rear pod

XRAY is pleased to offer the all-new XRAY T2R PRO, the latest release from the XRAY design studio that will surely please the masses. The XRAY T2R PRO represents the latest evolution of the super-successful RAYCER concept – luxury at an affordable price. The new XRAY T2R PRO is based on the award-winning XRAY T2 high-performance electric touring car platform, a car that has raised the bar in engineering, design, and performance and has won the hearts of racers worldwide along with an exceptional amount of titles and awards. With the worldwide success of the T2 platform — my best touring car design to date — I wanted to release a platform that would allow everyone to enjoy the design and performance benefits of the T2 platform no matter what their racing needs and budget are. See it. Feel it. Drive it. Dipl. Eng. Juraj Hudy Chief Engineer, XRAY T2R PRO main features: • Based on the ultra-successful, award-winning, and racing-dominating XRAY T2’008 & T2’009 platforms • Competition racing design featuring well-proven suspension geometry, drivetrain, and parts — the whole racing platform of T2 cars! • Majority of the parts being fully compatible and interchangeable among other T2 Based cars • LiPo-ready with unique pads that raise the top deck to fit popular-sized LiPo battery packs • Ultra-lightweight front and rear split bulkheads are CNC-machined from Swiss 7075 T6 aluminum, allowing super-easy diff and layshaft access • New super-light Swiss 7075 T6 aluminum front & rear drive shafts • Extra-durable drive axles manufactured from premium Hudy Spring Steel™ • T2 dual-belt drive train featuring 34T/20T pulleys and premium-quality, Kevlar® reinforced drive belts • Designed to meet ROAR, EFRA, and FEMCA regulations • 6-cell chassis design allows use of either 5- and 6-cell battery NiMH packs, or LiPo pack • Chassis and top deck design carried over from the latest XRAY T2’009, CNC-machined from strong yet flexible fiberglass; provides unique handling characteristics to make the car super fast yet super easy to drive • Specially-designed top deck provides extra torsion and flex to generate dependable grip • High-quality composite rear ball differential featuring balls for super-smooth runs • Super-light composite front Solid Axle with XRAY’s own smart quick-change outdrive system for easy outdrive exchange; no servicing or replacement of drive shaft blades needed, translates into reduced servicing costs • Centrally-positioned layshaft and split bulkheads provide optimum balance thanks to perfect weight distribution of the motor towards the centerline, giving quicker left-right transitions • Motor mount bulkhead features the lowest possible motor mount position, compatible with stock, modified, and brushless motors • XRAY Quick Roll-Centers™ – 4 quick roll center adjustments in front, 6 quick roll center adjustments in rear • Battery backstops for better fit and clearance between soldering tabs • Fully-adjustable Quick-SaverTM features 5 different integrated Ackermann positions, positioned along chassis centerline • Centerline drivetrain concept with ultra-narrow chassis puts the batteries and electronics near the car centerline • Long top deck design minimizes tweak and increases stability • Middle layshaft CNC-machined from aircraft aluminum • Center top deck mount specially designed for rubber tires on carpet – decreases front suspension traction and eliminates front tire overheating, ensuring consistent handling during runs • Front bulkheads with extra reinforcement legs allow for additional chassis flex adjustment • Independent front & rear diff height adjustment • Integrated front & rear belt tension adjustment • Optimized suspension geometry and unique XRAY’s own well-proven mixture composite materials for optimum hardness yet flexibility of all suspension parts • Race-proven T2 suspension geometry featuring lightweight, strong, and durable suspension parts • Long front & rear suspension arms for improved traction and easier handling feature optimized shock mounting positions for improving steering and traction • Suspension arms feature integrated anti-roll bar mounts; rear arms feature two different anti-roll bar mounts for super-fine adjustment of the rear anti-roll bar • Medium hard C-hubs with integrated 4° caster (optional 2° and 6° caster blocks available) • Rear uprights with integrated 1° toe-in • Medium hard steering blocks with two Ackermann positions • Front suspension arms allow 2mm adjustment of front arm position • Front & rear shock towers machined from extra-thick 3.0mm fiberglass and featuring Quick Roll Center™ positions and optimized shock mounting positions • Front shock tower specially machined for ultra-low weight without compromising strength • Middle alu layshaft with centrally-positioned spur gear for perfect balance • Ready and optimized for brushless motor systems • Ready and optimized for most LiPo battery packs • Front upper & lower composite bumper made from special composite to withstand hard impacts • Compact front foam bumper made from lightweight, high-resilience foam • Thick 6mm body posts • Lower suspension alu holders with 3 different roll center positions • XRAY 4-step externally adjustable shocks allow easy and quick adjustment; standard, non-adjustable shock pistons also included • Short, specially-hardened shock rods for maximum strength • Shock absorber foam inserts for improved shock rebound • XRAY self-developed and manufactured ultimate racing springs are manually selected for maximum precision, equal length, and equal damping characteristics. Special set of optional black racing springs for EU edition car available separately • Hardened 84T spur gear • Composite battery backstops prevent battery movement on chassis • Complete set of high-speed blue-sealed ball-bearings, degreased, lightly oiled for maximum efficiency, individually controlled, selected, and inspected • Easily adjustable inboard toe-in using included shims • Easily adjustable wheel offset using optional shims or optional offset aluminum wheel hubs (-0.75mm, 0mm, +0.75mm, +1.5mm) Adjustment Possibilities: • Fully-adjustable front and rear suspension geometry: caster, camber, toe, anti-dive, anti-squat, ride height, droop, track-width, roll center, wheelbase • XRAY Quick-Saver™ offers 5 different Ackermann positions for steering adjustment • Adjustable ball differential • XRAY Quick Roll-Centers™ • Adjustable bulkheads for belt-tension control • Front and rear diff height adjustment • Multiple upper and lower shock mounting locations at front and rear • Externally-adjustable racing shocks (4-step) • Pre-drilled chassis locations for optional chassis weights • Front & rear adjustable anti-roll bars (not included)

It’s all in the details.

XRAY 는 2000년에 RC 키트를 만들기 시작한 후 계속해서 최상의 품질높은 투어링 키트를 만들기만을 고수하였고 계속해서 각종 세계 레이싱 대회에서의 수많은 우승경력과 수많은 상을 수상하였으며 이제 XRAY는 새로운 버전의 현재 RC 투어링 키트 마켓에서 가장 발전된 버전의 투어링 키트인 XRAY T2'009를 출시하게 되었습니다. 혁명과 진화는 XRAY T2 플랫폼을 대표하는 키이며 XRAY 팩토리팀은 셀수없는 테스트와 노력으로 성공적인 T2플랫폼을 계속해서 진화시켰습니다. 현재 투어링키트 레이스의 빠른 룰 변경으로 인하여 XRAY T2'009 는 이에 초점을 맞추어 진화 및 변경을 가지게 되었으며 이는 009로 하여금 레이스의 어떤 컨디션과 룰에서도 최상의 성능을 보여줄 수 있게끔 하였습니다. 아스팔트, 카펫, 고무, 폼 타이어, 수소배터리, 리포배터리, 브러쉬드, 브러쉬리스 모터 등.. XRAY T2'009는 어떠한 장비를 사용해도 모든 레이스에서 그 우수항 성능을 뿜어낼 수 있습니다. Pure design. Pure racing. Pure adrenaline. Dipl. Eng. Juraj Hudy Chief Engineer, XRAY

T2'2009  새로운 특징:

• 성공적인 T2'008 플랫폼을 기반으로 만들어진 최상의 컴피티션 레이싱 키트 • 독특한 그라파이트 패드를 사용하여 어퍼데크를 올려주어 리튬폴리머 배터리를 언제든지 효율적으로 사용가능 • 새로워진 슈퍼 라이트 스위스 7075 T6 알루미늄 리어 드라이브 샤프트는 단단하게 아노다이징 처리가되었으며 기존 스탠다드 드라이브 샤프트보다 38% 무게가 가벼움 • 새로워진 슈퍼 라이트 드라이브 엑슬은 회전에 약 35% 가벼워짐 • EU, US 버전에 모두 사용된  34T/20T 풀리 • 리미티드 한정 애디션인 오랜지 컬러의 알루미늄 파트 (오랜지 컬러 알루미늄 파트는 키트를 빠르게 만들지는 않습니다) • 수많은 성능 향상 - 메터리얼 공법 향상, 마무리 등.. • 대부문의 파트가 XRAY T2'008 과 호환 사용가능 • ROAR, EFRA, FEMCA 룰에 맞춤 o US Foam-spec 6-cell Edition (#30 00014) – ROAR o EU Rubber-spec 6-cell Edition (#30 0013) – ROAR, EFRA, FEMCA • 샤시 배터리 슬롯이 배터리와 스퍼기어 사이의 공간을 늘리기 위하여 약간 바깥쪽으로 옮겨짐 • 6셀 샤시의 EU Edition은 5셀, 6셀 배터리가 모두 최상으로 사용가능 • 더 높은 그립력을 위한 신형 내로우 2.0mm ultra-thin  어퍼데크 • 트랙 컨디션의 변경에도 키트의 민감함을 줄여주면서 계속적으로 안정적인 주행을 펼칠 수 있음 • 배터리 백스탑을 낮춰주어 더 효율적으로 사용가능 • EU & US Editions 모두 스위스 7075 T6 알루미늄 볼 디프를 사용 • 중앙 포지션된 layshaft 와 split bulkheads 는 최상의 밸런스를 제공하면서 최상의 완벽한 무게배분을 실현 • 울트라 라이트 벌크헤드 7075 T6 알루미늄 CNC-머신처리 • 가벼워진 모터 마운트 벌크헤드로 스톡, 모디파이드, 브러쉬리스 모터에 최적 • XRAY만의 스파트 퀵 체인지 아웃드라이브 시스템

• 폼 / 고무 타이어 레이스 컨디션을 위해 특별히 맞춰진 드라이브 샤프트 길이
o US Edition: 폼타이어 사용을 위한 스탠다드 50mm CVD 드라이브 샤프트 (일반적으로 고무타이어보다 높은 트랙션 제공)
o EU Edition: 52mm 의 긴 프론트/리어 CVD 드라이브 샤프트가 약간 더 중앙쪽으로 위치. 이는 전체적인 트랙션을 높여주며 키트로 하여금 트랙션이 낮은 트랙에서도 쉬운 주행을 할 수 있도록 만들어줌
• 서보세이버의 샤시 중앙라인 위치
• 알루미늄 센터 탑 데크 마운트는 카펫에서의 고무타이어 사용을 위함 – 프론트 서스팬션 트랙션을 줄여주고 프론트 타이어의 과도한 열을 없애줌.. 꾸준한 핸들링 제공
• 추가 강화된 legs는 샤시의 플렉스를 추가로 조절할 수 있게함
• 독립적인 프론트/리어 디프 높이 적용
• 긴 프론트 & 리어 서스팬션 암은 트랙션을 증가와 쉬운 핸들링을 가져옴
• 인터그레이티드 안티 롤 바 마운트를 가진 서스팬션 암; 슈퍼 파인 리어 안티 롤 바 적용을 위한 두가지의 다른 안티 롤 바 마운트
• 프론트 & 리어 롤 바를 포함한 EU Edition (front 1.6mm & rear 1.4mm)
• CVD 조립과 분해를 쉽고 빠르게 하기 위해 큰 홀을 가진 C허브; 심한 크래쉬 충격시 C허브가 CVD가 맞닿는것을 방지 (ECS 드라이브 샤프트를 위한 구성)
• 스탠다드 캐스터 각 (2°, 4°, 6°)을 가진 C허브 ; 두가지의 강성 사용가능 (EU – medium, US – hard)
• 심각한 크래쉬로인한 서스팬션 변경을 피하기 위해 적용된 0° 토우인 리어 업라이트; 두가지 강도 이용가능 (EU – medium, US – hard)
• 두가지 강도로 만들어진 스테어링 블록  (EU – medium, US - hard)
• 프론트 암 포지션을 2mm 적용 가능한 프론트 서스팬션 암
• 프리미엄 그라파이트 재질로 만들어진 프론트 & 리어 쇽 타워 - 퀵 롤 센터 포지션 적용 과 쇽 포지션 위치 적용
• 강성을 그대로 유지한 울트라 로우 웨이트를 위한 프론트 쇽 타워
• 완벽한 밸런스를 위한 라이트 웨이트 중앙 알루미늄 layshaft  와 중앙 포지션된 스퍼기어
• 브러쉬리스 모터 시스템 최적으로 사용 가능
• 리튬폴리머 배터리 최적으로 사용가능



--------------------------------------------------------------------------------


http://artrc.net

Posted by ARTRC