ARTRC

CUBE 4600 - S.E - 컴피티션 레이싱스펙 시리즈 출시

(ARTRC) — Thu, 08 Jan 2009 03:52:40 +0900

CUBE 4600 - S.E - 컴피티션 레이싱 스펙 시리즈

CUBE 4600 - 스패셜 애디션 - 컴피티션 스팩 시리즈는 컴피티션 레이싱 컨샙 셀로써 최고의 파워와 최고의 런타임을 겸비한 레이싱용 셀 입니다.

CUBE 4600 - S.E - 컴피티션 레이싱 스펙 시리즈 특이사항

- 최대 파워에서 오는 최상의 퍼포먼스
- 최대 볼티지
- 최저 내부저항
- 최고의 안정성
- 관리하기 쉬운 셀
- 긴 런타임 제공

CUBE 4600 - S.E - Competition Spec Series

CUBE 4600 - Special Edition - Competition Spec Series are the concepts of competition racing cells having maximum performance with longest run time.

CUBE 4600 - S.E - Competition Spec

- Maximum performance with maximum power
- Maximum voltage
- Lowest internal resistance
- Great stability
- Maximum capacity

--------------------------------------------------------------------------------

http://artrc.net

[진호코리아] GO엔진 입고리스트 (12월 24일)

(ARTRC) — Wed, 24 Dec 2008 14:50:15 +0900

GO엔진 입고리스트

아래와 같은 리스트의 GO엔진 제품들이 입고되었습니다. 첨푸파일인 엑셀파일을 참고하시면 좋을것 같습니다.

신제품으로 GO엔진에서 출시하는 연료주입기가 입고되었으며 인기 엔진인 7포트터보, 5포트터보, 3포트터보, 머플러세트 등이 입고되었습니다.

감사합니다.

상품코드	비 고	제 품 이 름	권장소비자가격	웹 링크
GO217T-EC		GO Engine - 7P Turbo Gold Head Engine Combo with Muffler Set (EFRA)	389,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4379
GO215T-EC		GO Engine - 5P Turbo Silver Head Engine Combo with Muffler Set (EFRA)	369,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4381
GO213T-EC		GO Engine - 3P Turbo Red Head Engine Combo with Muffler Set (EFRA)	349,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4380
R217P-P320SG		21 PRO 7 Port Orange Head Buggy Engine	299,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4039
R286P-P420SG		28 PRO 6 Port Red Head Buggy Engine	319,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4041
28-0600		Connective Rod For 21.25.28	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4156
B-AY14B		Ball Bearing 14mmx25.4	35,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4406
PI-809		1/8 Muffler Set - EFRA 2047	83,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4411
OR-0006		Rubber Adaptor For Manifold.21.25.28	1,800원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4415
OR-0023	신제품	"O" Ring 2.9x1.78 for Pro	2,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4841
GO-C002		Clutch Tool	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4430
T-18	신제품	Fuel Pot 500cc (연료주입기)	5,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4842

--------------------------------------------------------------------------------

http://artrc.net

[진호코리아] LRP 입고 리스트 (12월 24일)

(ARTRC) — Wed, 24 Dec 2008 14:08:28 +0900

LRP 입고 리스트

아래와 같은 리스트의LRP 제품들이 입고되었습니다. 첨푸파일인 엑셀파일을 참고하시면 좋을것 같습니다.

신제품으로 LRP신형변속기 SPX, 그리고 LRP 하이파워 솔더 스테이션이 입고되었습니다.

감사합니다.

상품코드	비 고	제 품 이 름	권장소비자가격	웹 링크
38231		Z.28R - Conrod	53,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3506
36240	신제품	1/8 Offroad EFRA#3039 3-Chamber exhaust system (1 set)	198,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4837
81910		Sensorwire for brushless 200mm - std.	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=945
81920		Sensorwire for brushless 100mm - short	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=946
37100		Competition Starter Box	125,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1156
41361		Concept Stickpack Conditioner	32,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1146
41370		Concept Battery Conditioner 2	95,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3511
71011		Sportpack 2200/7.2 6-Cell Stickpack	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3075
80450	신제품	SPX Brushless Bullet Reverse	475,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4838
80710	신제품	SPX Brushless Competition StockSpec Speed-Control	475,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4839
82510		Brushless + Brushed Motor Cooling System	33,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=947
65011		Top Grip Carpet 2	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=923
65020		Top Grip Asphalt	15,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3507
80750		LRP SPHERE Competition TC-Spec.	498,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=997
50830		Vector X11 - 10.5T Brushless Stock Spec. ; Blue	138,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3885
65800	신제품	LRP HighPower Soldering Station	385,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4840

SPX Brushless Bullet Reverse

The perfect all-rounders on highest level

The all new SPX speedos are the perfect all-rounders on the highest level. Never before has a speed control been so versatile and unbeatable when it comes to value for money in r/c racing: brushless and brushed motors can be run with full power in forward and reverse! It is actually 4 speed controls on 1!

The LRP SPX speed controls are constantly communicating with the motor. The result is a high precision and intelligent Motor Management System with ultra precise throttle control, linear drive feel and a fully adaptive software.

This feature records the maximum internal component temperature in the speed control during the race and can be read out at the end of the run.
Advantages: Through the maximum internal operating temperature you know the capacity utilisation of the speed control. Then you can push your R/C car right up to its maximum power limits (stronger motor, gear ratio, % full throttle, etc.).

Brushless + Brushed: Forward/Brake/Reverse + Forward/Brake

Automatic brushless/brushed swichtover

Internal-Temp-Check System

Advanced digital with 4 adjustable modes

Big power capacitor optimised for Touring car application

Ice Drive Design

AutoCell System - Automatic NiMH-LiPo adaption

Voltage Input: 4.8 - 7.4V

Low-profile heat sink

Fan on/off via speed control main switch

25 years warranty

3x Multi Protection System

German Technology

SPX Brushless Competition StockSpec Speed-Control

Fresh out from R&D LRP brings you the LRP SPX Competition Stock Spec

Get the edge over the competition with this speed control specially developed for stock racing. Features improved hardware and our special “Stock Spec” software which increases stock motor performance significantly. Fully dual purpose and excellently suited for both stock and modified racing, the power profile 5-8 is specially for “Stock Spec” and 1-4 profile is ideally suited to modified racing.

Automatic brushless/brushed adaptation

Advanced digital with 4 adjustable modes

ADPC-Advanced Digital Phase Control

Stock and modified power profiles

Ice Drive Design

automatic NiMH/LiPo adaptation

Optimised for the use with 4, 5 and 6 Sub-C celles

Launch control

Internal-Temp-Check System

3.0A BEC

Blue LEDs

Weight only 24.5g

Multi-Protection-System

External soldering tabs

2,6mm² power-wire

Sensored design

LRP releases the first ever tailor-made Soldering Station for RC applications.

This extremely strong, digitally controlled soldering station satisfies highest demands and is easy to handle! It is universally applicable for perfect soldering joints on batteries, motors, speed controls and much more.

EXTREME POWER
90W power rating, 400kHz electromagnetic heating element, perfect soldering joints on batteries, motors, speed controls, etc...

EASY TIP - SYSTEM
The tips of the 90W handle with its comfortable rubber grip can easily be replaced in seconds without any tools.

MULTIFUNCTION HANDLE HOLDER
Magnetic Auto Sleep / Auto Wakeup function, when handle gets placed in handle for increased tip life. Working temperature is back after a very few seconds (<10 sec). Integrated clean and safe storage for replacement tips.

Worldwide operation 100-240VAC Input

Fully digital for perfect adjustments

EasyTip-system

Blue backlit Display

Light-weight and compact for easy transport

Multifunction handle holder

Output voltage	48 Volt
Output Power	90 Watt
Operation temp.	80-480°C
Sleeping temp.	50-250°C
Auto sleep timer	0-250 min

--------------------------------------------------------------------------------

http://artrc.net

HUDY Exclusive Transmitter Bag

(ARTRC) — Wed, 24 Dec 2008 11:22:43 +0900

#199170 HUDY Exclusive Transmitter Bag

With your transmitter being one of the single most important pieces of your racing equipment, it deserves all the protection it can get when traveling to and from races. To keep your transmitter safe and protected use the stylish HUDY Exclusive Transmitter Bag.

Well padded to withstand the rigors of travel and with a spacious interior, the transmitter bag safely protects even the large computer radios on the market today. With most racers carrying two transmitters to a race the HUDY Transmitter Bag is spacious enough to comfortable store two transmitters. To prevent the transmitters form moving during transport, an elastic safety strap inside the bag on the rear wall can be used to securely hold the transmitters.

Large dual zippers make access quick and easy. Strong lightweight nylon gives durability, and tough heavy-duty stitching is used throughout the bag’s construction. A wide, rubber-coated handle strap makes carrying super easy and comfortable. The clear-plastic pocket allows you to display an ID card so you can quickly identify your transmitter bag.

Two exterior straps at the rear of the bag allow you to mount the transmitter bag to most widely-used car carrying bags. A special wide elastic strap (also on the exterior) lets you fit the transmitter bag onto your hand luggage when traveling.

Manufactured in Europe from premium European high-quality materials, everything is premium on this bag. Highest-quality materials combined with expert workmanship ensure the durability, performance, and long life of this bag. For a unique and stylish look to separate yourself from the crowd, the HUDY Exclusive Transmitter Bag features full-colored stylish HUDY graphics emblazon on the bag exterior.

HUDY Exclusive Starter Box Bag

(ARTRC) — Wed, 24 Dec 2008 11:20:38 +0900

#199160 HUDY Exclusive Starter Box Bag

• Premium Exclusive Bag
• Cool & Stylish Grafics
• High Quality European Materials
• Comfortable Paded Handle
• Padded Walls
• On-Road or Off-Road Starter Box
• Full Color Printing

Well padded to withstand the rigors of travel and with a spacious interior, the starter box bag safely protects your nitro car starter box. Large dual zippers make access quick and easy. Strong lightweight nylon gives durability, and tough heavy-duty stitching is used throughout the bags construction. A wide, rubber-coated handle strap makes carrying super easy and comfortable. The clear-plastic pocket allows you to display an ID card so you can quickly identify your starter box bag.

Manufactured in Europe from premium European high-quality materials, everything is premium on this bag. Highest-quality materials combined with expert workmanship ensure the durability, performance, and long life of this bag. For a unique and stylish look to separate yourself from the crowd, the HUDY Exclusive Starter Box Bag features full-colored stylish HUDY graphics emblazon on the bag exterior.

--------------------------------------------------------------------------------

http://artrc.net

XRAY & HUDY 제품 입고리스트 (12월 24일)

(ARTRC) — Wed, 24 Dec 2008 11:07:54 +0900

XRAY & HUDY 입고 리스트

아래와 같은 리스트의 XRAY & HUDY 제품들이 입고되었습니다.

신제품으로는 XRAY T2R Pro, XRAY XII, XRAY 808용 액티브 디프, XRAY ECS 드라이브 샤프트 52MM(아스팔트용), HUDY 휠 밸랜싱 스테이션, HUDY 오일, 퍼스널 레이싱 디스플레이, HUDY 캐링백 등이 있습니다.

제품구입 및 문의는 이용하시는 과학사 및 소매점을 이용바랍니다.

감사합니다.

상품코드	비 고	제 품 이 름	권장가격	웹 링크
10 2003		HUDY EXCELLENT TIRE TRUER - FULLY AUTOMATIC 1/8, 1/10, 1/12 - FULL OPTION	598,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1485
10 2353		WHEEL ADAPTER 1/10 - ALL TOURING CARS	46,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1492
10 2362		WHEEL ADAPTER 1/8 - SERPENT, MUGEN, KYOSHO, MOTONICA, SHEPHERD	46,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1494
10 4140		HUDY ENGINE BREAK-IN BENCH	158,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3486
10 5500	신제품	HUDY UNIVERSAL TIRE BALANCING STATION	58,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4820
10 5510	신제품	WHEEL ADAPTER FOR 1/8 OFF-ROAD CARS, TRUGGY & RALLY GAME	36,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4821
10 5520	신제품	WHEEL ADAPTER FOR 1/10 TOURING CARS	36,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4822
10 6210		HUDY GRAPHITE GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3487
10 6211		HUDY DIFF GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3488
10 6220	신제품	HUDY BEARING GREASE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4823
10 6221	신제품	HUDY BEARING GREASE - EXTRA	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4824
10 6222	신제품	HUDY BEARING GREASE - PREMIUM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4825
10 6230		HUDY BEARING OIL	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3571
10 6231	신제품	HUDY ONE-WAY LUBE	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4826
10 7570		HUDY 17MM OFF-ROAD WHEEL NUT TOOL	45,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3139
10 7581		WRENCH-GLOWPLUG / CLUTCHNUT 10 MM - LONG	29,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1462
10 7600		REAMER FOR LEXAN BODIES 0-18 MM + COVER	44,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1463
10 7610		EXHAUST SPRING / CASTER CLIP REMOVER	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1464
10 7634		ARM REAMER + REPL. TIP 4.0 x 120 MM	18,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3377
10 7701		CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8, 1/10 (2)	32,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1469
10 7711		CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8, 1/10 CARS (20 MM)	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1471
10 7850	신제품	HUDY PERSONAL RACING DISPLAY	75,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4827
10 8201		FLAT SET-UP BOARD FOR 1/10	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1476
10 8210		PLASTIC SET-UP BOARD DECAL FOR 1/8, 1/10	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1477
10 9305		UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 TOURING CARS	230,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1483
11 1540		ALLEN WRENCH + REPL. TIP 1.5 x 120 MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1415
11 2041		REPLACEMENT TIP # 2.0 x 120 MM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1352
11 3040		ALLEN WRENCH + REPL. TIP 3.0 x 120 MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1418
11 4040		ALLEN WRENCH + REPL. TIP 4.0 x 120 MM	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1419
11 5040		ALLEN WRENCH + REPL. TIP 5.0 x 120 MM	22,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1420
11 5041		REPLACEMENT TIP # 5.0 x 120 MM	11,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1358
12 6340		ALLEN WRENCH + REPL. TIP .063 x 120 MM (1/16")	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1425
12 6349		PT ALLEN WRENCH + REPL. TIP .063 x 120 MM (1/16")	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1397
12 9340		ALLEN WRENCH + REPL. TIP .093 x 120 MM (3/32")	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1427
12 9349		PT ALLEN WRENCH + REPL. TIP .093 x 120 MM (3/32")	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1399
13 2040		ALLEN WRENCH + BALL REPL.TIP 2.0 x 120 MM	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1428
13 9340		ALLEN WRENCH + BALL REPL.TIP # .093 x 120 MM	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1434
13 9341		REPLACEMENT TIP BALL # .093 x 120 MM (3/32")	14,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1375
16 3029		PT PHILLIPS SCREWDRIVER 3.0 x 80 MM	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1511
16 4040		PHILLIPS SCREWDRIVER 4.0 x 120 MM / 18MM (SCREW 2.9 AND M3)	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1443
16 5000		PHILLIPS SCREWDRIVER 5.0 x 120 MM / 22MM (SCREW 3.5 AND M4)	25,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1444
17 0050		SOCKET DRIVER 5.0 MM	26,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1448
17 0059		PT SOCKET DRIVER 5.5 MM	15,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1514
17 0104		SOCKET DRIVER 1/4" (6.35 MM)	28,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1453
17 0109		PT SOCKET DRIVER 1/4" (6.35 MM)	15,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1518
17 1132		SOCKET DRIVER 11/32" (8.731 MM)	28,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1457
17 1139		PT SOCKET DRIVER 11/32" (8.731 MM)	17,800원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1522
19 0150		SCREWDRIVER & PHILLIPS SET - 5 PCS.	105,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1410
19 0170		SOCKET DRIVER METRIC SET - 6 PCS.	135,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3141
19 0210		BASIC SET - 9 PCS.	195,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1413
19 9010	신제품	HUDY RC TOOLS BAG	98,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4828
19 9100	신제품	HUDY 1/10 TOURING CARRYING BAG + TOOL BAG - EXCLUSIVE EDITION	198,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4829
20 9071		HUDY PIT TOWEL 1200 x 730	27,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1329
20 9103		HUDY STICKERS FOR BODIES	3,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1334
30 0013		XRAY T2'009 - EU RUBBER-SPEC 6-CELL EDITION - 1/10 LUXURY ELECTRIC TC	598,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4757
30 0102		XRAY T2R PRO - 1/10 RACING ELECTRIC TC	458,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4818
30 1128	신제품	T2'009 CHASSIS 2.5MM GRAPHITE - 6-CELL - RUBBER-SPEC	154,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4830
30 2022		T2 ALU UPPER CLAMP FOR BULKHEADS	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2432
30 2044		T2 LOWER SUSPENSION HOLDERS (2+2+2)	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2439
30 2253		T2 COMPOSITE STEERING BLOCK - HARD - FOAM-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3578
30 2363		T2 COMPOSITE C-HUB RIGHT - 4° DEG. - MEDIUM - RUBBER-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3579
30 2364		T2 COMPOSITE C-HUB LEFT - 4° DEG. - MEDIUM - RUBBER-SPEC	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3580
30 3163		T2'008 REAR SUSPENSION ARM - HARD - RUBBER-SPEC - 1-HOLE	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3584
30 3482		T2 ANTI-ROLL BAR REAR 1.2 MM	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2617
30 5082		DIFF WASHER 17 x 23 x 1 (2)	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2631
30 5121		MULTI-DIFF LOCKING AXLE - HUDY SPRING STEEL	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2638
30 5325		EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 50MM - HUDY SPRING STEEL™ (1)	65,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4744
30 5326	신제품	ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM	35,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4831
30 5327	신제품	EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 52MM - HUDY SPRING STEEL™ (1)	65,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4832
30 5328	신제품	ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 50MM	35,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4833
30 5329	신제품	DRIVE SHAFT - 32 MM - SPRING STEEL (2)	39,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2660
30 5340		T2 DRIVE AXLE - HUDY SPRING STEEL	17,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2661
30 5341	신제품	T2 DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™	26,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4834
30 5350		T2 ALU WHEEL HUB (2)	12,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2662
30 5380		T2 ALU WHEEL SHIM OFFSET 0.75MM (2)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2666
30 5390	신제품	ECS DRIVE SHAFT PIN 1.5 x 8 - V2 (2)	10,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4745
30 5391	신제품	ECS DRIVE SHAFT PIN 1.5 x 9 WITH FLAT SPOT (2)	9,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4759
30 5431		HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 507 MM	16,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2667
30 5439	신제품	HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 423 MM	20,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2668
30 5442		HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 180 MM	15,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2669
30 5577		T2'008 FIXED PULLEY 20T (2)	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3674
30 7214		FRONT WISHBONE PIVOT PIN LOWER - SPRING STEEL (2)	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2709
30 8306	신제품	XRAY T2'008 ALU SHOCK ABSORBER-SET (2)	52,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4761
30 8374		XRAY SPRING-SET C = 2.4 (2)	12,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3682
30 8377		XRAY SPRING-SET C = 3.0 (2)	12,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3616
35 0003		XRAY XB808 - LUXURY 1/8 NITRO OFF-ROAD CAR	798,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3893
35 1200		FRONT & REAR BUMPER - V2	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1840
35 2002		XB808 DIFF BULKHEAD BLOCK SET FRONT/REAR - V2	18,900원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3959
35 2087		XB808 FRONT ALU BRACE SWISS 7075 T6 (5MM) - HARD COATED	53,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4586
35 2093		XB808 FRONT ALU SHOCK TOWER SWISS 7075 T6 (3MM) - HARD COATED	50,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4587
35 2664		XB808 COMPOSITE STEERING BALL JOINT 6.8MM (2)	6,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3980
35 3086		XB808 ALU REAR BRACE SWISS 7075 T6 (5MM) - HARD COATED	53,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4620
35 3515		REAR WING - BLACK	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3694
35 5050		CENTER DIFF SPUR GEAR 46T	37,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2009
35 5101		XRAY XT8 ACTIVE DIFF™	159,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=3720
35 8513		CLUTCH BELL 13T	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2068
35 8531		FLYWHEEL	13,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2071
35 8585		CLUTCH SPRINGS - HARD (3)	7,500원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1807
35 8600		FUEL TANK 120CC - SET	23,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2078
35 8800		AIR FILTER SET	13,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2088
35 8840		AIR FILTER FOAM & OIL	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2091
35 8901		COMPOSITE FUEL FILTER SET	7,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2093
35 8950		SILICONE TUBING 1M (2.4 x 5.5MM)	8,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2095
35 9050		CLUTCH BELL BALL-BEARING MR105ZZ 5x10x4 (2)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2002
37 0000		XRAY XII - 1/12 PAN CAR	398,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4819
38 9163		XRAY MICRO MOTOR 370 SUPERSIZE	30,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2960
39 7232		XRAY 1/10 TOURING CARRYING BAG - EXCLUSIVE EDITION	178,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4747
39 7324	신제품	XRAY T2'009 STICKER FOR BODY - WHITE	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4835
90 1405		HEX SCREW SB M4x5 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2183
90 2205		HEX SCREW SH M2x5 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2186
90 2306		HEX SCREW SH M3x6 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2188
90 2308		HEX SCREW SH M3x8 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2189
90 2310		HEX SCREW SH M3x10 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2190
90 2312		HEX SCREW SH M3x12 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2191
90 2318		HEX SCREW SH M3x18 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2194
90 2322		HEX SCREW SH M3x22 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2196
90 2330		HEX SCREW SH M3x30 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2197
90 3308		HEX SCREW SFH M3x8 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2202
90 3310		HEX SCREW SFH M3x10 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2203
90 3312		HEX SCREW SFH M3x12 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2204
90 3412		HEX SCREW SFH M4x12 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2207
91 0258		SCREW PHILLIPS M 2.5x8 (10)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2305
93 0020		BALL STEEL 2.4MM (24)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2307
30 9072	신제품	Tungsten Carbide Axial Thrustbearing F3-8 3x8x3.5 - PRO	19,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=4836
94 0510		HIGH-SPEED BALL-BEARING 5x10x4 RUBBER SEALED (2)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2320
94 1015		HIGH-SPEED BALL-BEARING 10x15x4 RUBBER SEALED (2)	4,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2323
96 3030	신제품	CONE WASHER ST 3x8x0.5 (10)	10,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2336
97 0050		O-RING 5x1 (10)	6,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=2358
98 0212		PIN 2x11.6 (10)	5,000원	http://jinhokorea.com/shop/goods/goods_view.php?goodsno=1735

Premium-quality exclusive tool bag with a super-modern look with cool, stylish and full-color graphics around the bag. High-quality European materials and craftsmanship. Ideal size for carrying your RC tools and accessories; holds up to 30 tools.

Super-strong stretchy Xylan holds the tools and will keep its stretchability for a long time. The inside walls feature a strong plastic sheet sewn for reinforcement, ensuring that even when the bag is fully loaded with tools it will not twist or bend. A heavy-duty lockable zipper is included, as well as a strong yet super-soft spongy handle for comfortable handling.

• Premium, exclusive tool carrying bag
• Super modern and outstanding never seen before look
• Cool, stylish and full-color graphics around the bag
• High-quality European materials
• Manufactured exclusively in Slovakia, Europe
• Ideal size for carrying all the tools and accessories
• Holds up to 30 tools
• Easy to organize tools inside the box
• Super-strong stretchy xylan holds the tools and will keep its stretchy characteristics long time
• Inside walls a strong plastic sheets are sewn up to reinforce the walls of the carrying bag to ensure when the bag is fully loaded with tools it will not twist or bend
• Heavy-duty lockable zipper
• Strong yet super-soft spongy handle for comfortable handling

CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Fits XRAY T2’009.

Knowing that every small detail impacts the handling and performance of a high-performance car, XRAY CNC-machines every chassis in-house using the most modern German milling machines… fully robotically operated and controlled to ensure that every chassis meets the tightest manufacturing tolerances.

XRAY proudly presents the new ECS drive shaft 52mm, designed with high-level racing in mind. The ECS drive shafts were developed to decrease front wheel vibration when racing with a solid front axle, thus providing a much smoother and quieter ride and increasing steering.

The ECS drive shaft equalizes the speed between the drive shaft and the wheel. With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise and easier to drive.

With the new ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased and cornering speed and smoothness increases noticeable.

The ECS drive shaft comes factory pre-assembled for quality checking, but it is not immediately ready to use. Before using follow the instruction manual.

NOTE: To use the ECS drive shafts you need to use the front C-hubs V2 with the larger opening. The C-hubs V2 were included in all T2'008 kits, so owners of the T2, T2'007 and T2R must purchase the C-hubs V2 separately.

HUDY Bearing Grease is an extended-life multipurpose lubricant for ball bearings and is a direct replacement for the grease delivered in ball-bearings. HUDY Bearing Grease combines an optimized additive package with proven synthetic-base oils and a robust lithium complex thickener system to provide outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions. Features:
• Excellent resistance to water and seal compatibility
• Multi-service capability with reduced wear
• Very low running torque values
• Specially designed for ball-bearings

HUDY Bearing Grease Extra is an advanced lubricant incorporating both extreme pressure additives and finely dispersed graphite for load carrying. The Extra lubricant is an advanced replacement for the standard bearing grease. The HUDY Bearing Grease Extra is formulated to have excellent adhesion and resistance to “fling-off” under extreme conditions and provides outstanding protection against wear, rust, high temperature degradation and demanding startup and heavy loading conditions.
Features:
• Excellent resistance to water and seal compatibility
• High level of protection against wear and scuffing
• Very low running torque values
• Specially designed for ball-bearings.

HUDY Bearing Grease Premium is a supreme-performance lubricant for extreme overload conditions in highly-loaded bearings. The grease combines the unique features of synthetic-base fluids with those of a high-quality lithium complex thickener. The wax-free nature of synthetic fluids and low coefficient of friction provide very low running torque. This grease reduces operating temperatures in the load zone of spherical roller- and ball-bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The grease has a high level of chemical stability and is formulated with special additive combinations to provide excellent protection against wear, rust and corrosion at high and low temperatures.

Features:
• Excellent protection at high temperatures and low torque
• Outstanding high-temperature and low-temperature performance
• Reduced downtime and maintenance costs because of reduced wear, rust and corrosion
• Excellent protection against wear, rust, and corrosion
• Extended service life with longer intervals between re-lubrication and improved bearing life
• Excellent thermal stability and oxidation resistance
• Low traction coefficient
• Retains excellent grease performance in hostile aqueous environments
• Outstanding structural stability in the presence of water
• Helps resists viscosity increase at high temperatures to maximize re-lubrication intervals and bearing life.

In the world of the small, agile, and super-fast 1/12 pancars, winners are separated from the rest of the pack sometimes by only fractions of a second. With simpler designs compared to larger touring cars, attention to detail is paramount.

The new XRAY XII may at first glance seem like a simple and traditional design, but that’s where the similarities end. The XRAY XII achieves a state of perfection by focusing on well thought-out refinements to create a car that is easy to drive, work on, and adjust.

Top-quality materials such as self-developed composite mixtures, HUDY Spring Steel™, premium Swiss 7075 T6 aluminum and highest-grade graphite are the signature of XRAY and the XII has them in abundance. Designed in virtual reality using the world’s most sophisticated CAD tools, and manufactured using the world’s best machining and molding machinery, the XII achieves a level of premium perfection in all details that is second to none. All parts are purpose-designed and manufactured by XRAY, so all parts fit and work perfectly together.

In a world where overly-complicated designs hinder rather than enhance, the XII stands alone and ahead as the best performing out-of-the-box racer.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Main features:

• All-new XRAY 1/12 pan-car with authentic 100% self-developed XRAY parts, designed and manufactured parts by XRAY in Europe
• Legendary XRAY premium design, workmanship & material quality and unmatched attention to the finest details
• Conventional and proven 1/12 platform with redesign by legendary RC designer and XRAY’s award-winning Chief Designer - Ing. Hudy Juraj
• Simple yet effective and proven design, well thought-out details, unmatched precision of all small details
• Specially designed and optimized for brushless and brushed motors
• High-competition design with focus on ultra-low weight, resulting in super-lightweight construction.
• Optimized for indoor carpet racing as well as outdoor asphalt racing
• CNC-machined chassis from custom-manufactured 2.0mm high-grade graphite material with specially-designed compound for carpet racing and asphalt racing; for extra-high grip carpet tracks an optional stiff chassis will be available
• Chassis layout optimally designed to give sufficient stiffness for excellent handling, but flexible enough to generate sufficient grip and traction
• Super-narrow chassis design and layout with all weight centralized along the centerline
• Chassis and rear pod features pre-drilled centerline holes for optimum weight balance adjustment using HUDY Balancing Tool #107880

• Composite front chassis protectors protect the front of the chassis in crashes
• Robust body posts with fully-adjustable body holders; optional super fine +1 or +2mm body backstops available optionally for even more super-fine body height adjustment.
• High-competition, fully-adjustable front suspension with super-clean design of all composite suspension parts
• All composite parts manufactured by XRAY using premium self-developed composite mixtures which guarantee sufficient flex of the suspension parts yet hard enough to withstand heavy crashes
• Highest quality of all composite parts ensures super-precise fitment, easy assembly, and smooth operation of all parts
• Lower fixed suspension arms feature embedded self-locking nuts for easy assembly, prevents bending in the suspension and unwanted chassis tweak
• Fast & easy front caster adjustment via included clips
• Reactive caster adjustment of preset 2.5°, 5.0° or 7.5° via easy-to-change eccentric bushings
• Super-tiny yet robust steering blocks with uniquely-designed axles which prevent axle spinning while tightening the wheel locking nuts
• Additional front axle shims for adjustable front track-width
• Ultra-precise wheel axles CNC-machined from premium HUDY Spring Steel™ additionally hardened and hand ground for precision fitment
• Pivoting front suspension with super-smooth hardened steel kingpins supported by soft springs; optional medium, hard, and extra-hard suspension springs available as options
• Front ride height adjustment and front track-width adjustment via shims
• High-precision, HUDY Spring Steel™ pivot balls ensure super-fine movement of the front suspension under compression
• Graphite front upper brace between front suspension pins provides medium stiffness; aluminum adjustable front brace available as an option
• Front upper 3mm adjustable HUDY Spring Steel™ camber turnbuckles are lightweight yet can withstand heavy crashes
• Lightweight composite servo mounts with two different positions allow fitment of most popular micro and mid-size steering servos
• Tiny yet robust servo saver with easy Ackermann adjustment via shims mounted below pivot balls
• Tiny, ultra-flat composite battery holders keep batteries in place; multiple placement options (front, rear) for different chassis weight balance
• Tiny lightweight antenna mount secures lightweight yet strong molded fiberglass rollover antenna, also doubles as the shock absorber mount

• XRAY micro shock with similar design as it’s “big brother” counterpart in XRAY’s successful T2 touring car platform
• Fully-adjustable shock with aluminum shock body hard-anodized for ultra durability and additionally black coated for stylish look
• Fine-threaded shock body for quick and easy shock spring preload adjustment
• Tiny thin shock membrane gives super-smooth dampening characteristics
• Super-soft silicone shock O-ring for smooth operation while preventing oil leakage
• Ultra-finely finished shock shaft with precise-molded composite shock piston ensures optimum shock oil flow and smooth shock absorber action
• Simple yet smart shock construction allows for quick and easy shock-length adjustment for downstop adjustment
• Shock position adjustment via shimming of HUDY Spring Steel™ shock ball studs
• Rear suspension with conventional rear pod is adjustable via fiberglass T-bar, providing extremely easy assembly and tuning while being very effective and give the highest competitive performance
• T-bar included for carpet & asphalt racing; optional T-bars in different thickness available for super-fine tuning and adjustment
• Unique T-bar mounting methods allow for two different settings:
• Club race setting – direct mounting of T-bar to chassis without front pivotball gives limited adjustment possibilities (recommended for beginner drivers)
• Pro race setting – pivotball mounting of T-bar to chassis for more advanced adjustment possibilities (recommended for advanced drivers)
• Precision T-bar pivot balls machined from ultra-strong HUDY Spring Steel™ additionally hardened for perfect shape and smoothness
• Adjustable T-bar setscrews for adjusting chassis tweak
• Two different T-bar tweak screw positions for adjusting responsiveness
• Premium-grade graphite upper deck provides solid attachment for shock absorber to rear pod

• Special 1-piece aluminum damper pad holder is mounted independently from the rear body mount to ensure independent and equal left-right movement of rear pod
• Spring-loaded upper and lower damper pads provide addition control of rear pod movement; grease-retaining grooves in damper pads ensure equal and consistent friction characteristics
• Rear body posts are mounted to the chassis via a wide independently-mounted graphite holder, ensuring body downforce is properly transferred to the chassis
• Compact and ultra-lightweight rear pod constructed from high-strength aluminum bulkheads, rear aluminum brace, and thin but strong high-grade graphite plates
• Rear pod bulkheads CNC-machined from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look.
• Rear bulkheads are strategically machined to reduce weight to minimum while retaining strength
• Super-easy motor top access
• Rear pod accommodates brushed or brushless motors
• Eccentric composite bushings included for ultra-fine rear ride height adjustment
• Aluminum rear hubs machined from lightweight aircraft aluminum, specially lightened and black coated for stylish look
• Super-lightweight rear axle made from 1-piece high-grade graphite rod, additionally precision hand ground to eliminate vibration and run-out
• Rear differential features high-grade precision carbide balls for spur gear, hardened and precision-ground D-steel shims, and premium carbide 3x8mm axial thrustbearing
• Lightweight rear wheel mounting screws for reduced rotating weight
• Rear left aluminum wheel hub with center-balanced clamping mounting system, ensures secure mounting while eliminating vibration and run-out
• Precision-molded spur gear made from XRAY's exclusive composite material, ensuring true running, super-quiet operation, super lightness and robustness for handling powerful motors
• Easy rear track-width adjustment via included shims
• Rear pod weight balance can be easily adjusted via shims between motor and bulkhead
• Optimized weight balance when using brushless motors; when using lighter brushed motors the weight balance can be adjusted by shimming motor in the rear pod

XRAY is pleased to offer the all-new XRAY T2R PRO, the latest release from the XRAY design studio that will surely please the masses. The XRAY T2R PRO represents the latest evolution of the super-successful RAYCER concept – luxury at an affordable price.

The new XRAY T2R PRO is based on the award-winning XRAY T2 high-performance electric touring car platform, a car that has raised the bar in engineering, design, and performance and has won the hearts of racers worldwide along with an exceptional amount of titles and awards.

With the worldwide success of the T2 platform — my best touring car design to date — I wanted to release a platform that would allow everyone to enjoy the design and performance benefits of the T2 platform no matter what their racing needs and budget are.

See it. Feel it. Drive it.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

T2R PRO main features:

• Based on the ultra-successful, award-winning, and racing-dominating XRAY T2’008 & T2’009 platforms
• Competition racing design featuring well-proven suspension geometry, drivetrain, and parts — the whole racing platform of T2 cars!
• Majority of the parts being fully compatible and interchangeable among other T2 Based cars
• LiPo-ready with unique pads that raise the top deck to fit popular-sized LiPo battery packs
• Ultra-lightweight front and rear split bulkheads are CNC-machined from Swiss 7075 T6 aluminum, allowing super-easy diff and layshaft access
• New super-light Swiss 7075 T6 aluminum front & rear drive shafts
• Extra-durable drive axles manufactured from premium Hudy Spring Steel™
• T2 dual-belt drive train featuring 34T/20T pulleys and premium-quality, Kevlar® reinforced drive belts
• Designed to meet ROAR, EFRA, and FEMCA regulations
• 6-cell chassis design allows use of either 5- and 6-cell battery NiMH packs, or LiPo pack
• Chassis and top deck design carried over from the latest XRAY T2’009, CNC-machined from strong yet flexible fiberglass; provides unique handling characteristics to make the car super fast yet super easy to drive
• Specially-designed top deck provides extra torsion and flex to generate dependable grip
• High-quality composite rear ball differential featuring balls for super-smooth runs
• Super-light composite front Solid Axle with XRAY’s own smart quick-change outdrive system for easy outdrive exchange; no servicing or replacement of drive shaft blades needed, translates into reduced servicing costs
• Centrally-positioned layshaft and split bulkheads provide optimum balance thanks to perfect weight distribution of the motor towards the centerline, giving quicker left-right transitions
• Motor mount bulkhead features the lowest possible motor mount position, compatible with stock, modified, and brushless motors

• XRAY Quick Roll-Centers™ – 4 quick roll center adjustments in front, 6 quick roll center adjustments in rear
• Battery backstops for better fit and clearance between soldering tabs
• Fully-adjustable Quick-SaverTM features 5 different integrated Ackermann positions, positioned along chassis centerline
• Centerline drivetrain concept with ultra-narrow chassis puts the batteries and electronics near the car centerline
• Long top deck design minimizes tweak and increases stability
• Middle layshaft CNC-machined from aircraft aluminum
• Center top deck mount specially designed for rubber tires on carpet – decreases front suspension traction and eliminates front tire overheating, ensuring consistent handling during runs
• Front bulkheads with extra reinforcement legs allow for additional chassis flex adjustment
• Independent front & rear diff height adjustment
• Integrated front & rear belt tension adjustment
• Optimized suspension geometry and unique XRAY’s own well-proven mixture composite materials for optimum hardness yet flexibility of all suspension parts
• Race-proven T2 suspension geometry featuring lightweight, strong, and durable suspension parts
• Long front & rear suspension arms for improved traction and easier handling feature optimized shock mounting positions for improving steering and traction
• Suspension arms feature integrated anti-roll bar mounts; rear arms feature two different anti-roll bar mounts for super-fine adjustment of the rear anti-roll bar
• Medium hard C-hubs with integrated 4° caster (optional 2° and 6° caster blocks available)
• Rear uprights with integrated 1° toe-in
• Medium hard steering blocks with two Ackermann positions
• Front suspension arms allow 2mm adjustment of front arm position
• Front & rear shock towers machined from extra-thick 3.0mm fiberglass and featuring Quick Roll Center™ positions and optimized shock mounting positions
• Front shock tower specially machined for ultra-low weight without compromising strength
• Middle alu layshaft with centrally-positioned spur gear for perfect balance

• Ready and optimized for brushless motor systems
• Ready and optimized for most LiPo battery packs
• Front upper & lower composite bumper made from special composite to withstand hard impacts
• Compact front foam bumper made from lightweight, high-resilience foam
• Thick 6mm body posts
• Lower suspension alu holders with 3 different roll center positions
• XRAY 4-step externally adjustable shocks allow easy and quick adjustment; standard, non-adjustable shock pistons also included
• Short, specially-hardened shock rods for maximum strength
• Shock absorber foam inserts for improved shock rebound
• XRAY self-developed and manufactured ultimate racing springs are manually selected for maximum precision, equal length, and equal damping characteristics. Special set of optional black racing springs for EU edition car available separately
• Hardened 84T spur gear
• Composite battery backstops prevent battery movement on chassis
• Complete set of high-speed blue-sealed ball-bearings, degreased, lightly oiled for maximum efficiency, individually controlled, selected, and inspected
• Easily adjustable inboard toe-in using included shims
• Easily adjustable wheel offset using optional shims or optional offset aluminum wheel hubs (-0.75mm, 0mm, +0.75mm, +1.5mm)

Adjustment Possibilities:

• Fully-adjustable front and rear suspension geometry: caster, camber, toe, anti-dive, anti-squat, ride height, droop, track-width, roll center, wheelbase
• XRAY Quick-Saver™ offers 5 different Ackermann positions for steering adjustment
• Adjustable ball differential
• XRAY Quick Roll-Centers™
• Adjustable bulkheads for belt-tension control
• Front and rear diff height adjustment
• Multiple upper and lower shock mounting locations at front and rear
• Externally-adjustable racing shocks (4-step)
• Pre-drilled chassis locations for optional chassis weights
• Front & rear adjustable anti-roll bars (not included)

It’s all in the details.

XRAY 는 2000년에 RC 키트를 만들기 시작한 후 계속해서 최상의 품질높은 투어링 키트를 만들기만을 고수하였고 계속해서 각종 세계 레이싱 대회에서의 수많은 우승경력과 수많은 상을 수상하였으며 이제 XRAY는 새로운 버전의 현재 RC 투어링 키트 마켓에서 가장 발전된 버전의 투어링 키트인 XRAY T2'009를 출시하게 되었습니다.

혁명과 진화는 XRAY T2 플랫폼을 대표하는 키이며 XRAY 팩토리팀은 셀수없는 테스트와 노력으로 성공적인 T2플랫폼을 계속해서 진화시켰습니다.

현재 투어링키트 레이스의 빠른 룰 변경으로 인하여 XRAY T2'009 는 이에 초점을 맞추어 진화 및 변경을 가지게 되었으며 이는 009로 하여금 레이스의 어떤 컨디션과 룰에서도 최상의 성능을 보여줄 수 있게끔 하였습니다. 아스팔트, 카펫, 고무, 폼 타이어, 수소배터리, 리포배터리, 브러쉬드, 브러쉬리스 모터 등.. XRAY T2'009는 어떠한 장비를 사용해도 모든 레이스에서 그 우수항 성능을 뿜어낼 수 있습니다.

Pure design. Pure racing. Pure adrenaline.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

T2'2009 새로운 특징:

• 성공적인 T2'008 플랫폼을 기반으로 만들어진 최상의 컴피티션 레이싱 키트
• 독특한 그라파이트 패드를 사용하여 어퍼데크를 올려주어 리튬폴리머 배터리를 언제든지 효율적으로 사용가능
• 새로워진 슈퍼 라이트 스위스 7075 T6 알루미늄 리어 드라이브 샤프트는 단단하게 아노다이징 처리가되었으며 기존 스탠다드 드라이브 샤프트보다 38% 무게가 가벼움
• 새로워진 슈퍼 라이트 드라이브 엑슬은 회전에 약 35% 가벼워짐
• EU, US 버전에 모두 사용된 34T/20T 풀리
• 리미티드 한정 애디션인 오랜지 컬러의 알루미늄 파트 (오랜지 컬러 알루미늄 파트는 키트를 빠르게 만들지는 않습니다)
• 수많은 성능 향상 - 메터리얼 공법 향상, 마무리 등..
• 대부문의 파트가 XRAY T2'008 과 호환 사용가능
• ROAR, EFRA, FEMCA 룰에 맞춤
o US Foam-spec 6-cell Edition (#30 00014) – ROAR
o EU Rubber-spec 6-cell Edition (#30 0013) – ROAR, EFRA, FEMCA
• 샤시 배터리 슬롯이 배터리와 스퍼기어 사이의 공간을 늘리기 위하여 약간 바깥쪽으로 옮겨짐
• 6셀 샤시의 EU Edition은 5셀, 6셀 배터리가 모두 최상으로 사용가능
• 더 높은 그립력을 위한 신형 내로우 2.0mm ultra-thin 어퍼데크
• 트랙 컨디션의 변경에도 키트의 민감함을 줄여주면서 계속적으로 안정적인 주행을 펼칠 수 있음
• 배터리 백스탑을 낮춰주어 더 효율적으로 사용가능
• EU & US Editions 모두 스위스 7075 T6 알루미늄 볼 디프를 사용
• 중앙 포지션된 layshaft 와 split bulkheads 는 최상의 밸런스를 제공하면서 최상의 완벽한 무게배분을 실현
• 울트라 라이트 벌크헤드 7075 T6 알루미늄 CNC-머신처리
• 가벼워진 모터 마운트 벌크헤드로 스톡, 모디파이드, 브러쉬리스 모터에 최적
• XRAY만의 스파트 퀵 체인지 아웃드라이브 시스템

• 폼 / 고무 타이어 레이스 컨디션을 위해 특별히 맞춰진 드라이브 샤프트 길이
o US Edition: 폼타이어 사용을 위한 스탠다드 50mm CVD 드라이브 샤프트 (일반적으로 고무타이어보다 높은 트랙션 제공)
o EU Edition: 52mm 의 긴 프론트/리어 CVD 드라이브 샤프트가 약간 더 중앙쪽으로 위치. 이는 전체적인 트랙션을 높여주며 키트로 하여금 트랙션이 낮은 트랙에서도 쉬운 주행을 할 수 있도록 만들어줌
• 서보세이버의 샤시 중앙라인 위치
• 알루미늄 센터 탑 데크 마운트는 카펫에서의 고무타이어 사용을 위함 – 프론트 서스팬션 트랙션을 줄여주고 프론트 타이어의 과도한 열을 없애줌.. 꾸준한 핸들링 제공
• 추가 강화된 legs는 샤시의 플렉스를 추가로 조절할 수 있게함
• 독립적인 프론트/리어 디프 높이 적용
• 긴 프론트 & 리어 서스팬션 암은 트랙션을 증가와 쉬운 핸들링을 가져옴
• 인터그레이티드 안티 롤 바 마운트를 가진 서스팬션 암; 슈퍼 파인 리어 안티 롤 바 적용을 위한 두가지의 다른 안티 롤 바 마운트
• 프론트 & 리어 롤 바를 포함한 EU Edition (front 1.6mm & rear 1.4mm)
• CVD 조립과 분해를 쉽고 빠르게 하기 위해 큰 홀을 가진 C허브; 심한 크래쉬 충격시 C허브가 CVD가 맞닿는것을 방지 (ECS 드라이브 샤프트를 위한 구성)
• 스탠다드 캐스터 각 (2°, 4°, 6°)을 가진 C허브 ; 두가지의 강성 사용가능 (EU – medium, US – hard)
• 심각한 크래쉬로인한 서스팬션 변경을 피하기 위해 적용된 0° 토우인 리어 업라이트; 두가지 강도 이용가능 (EU – medium, US – hard)
• 두가지 강도로 만들어진 스테어링 블록 (EU – medium, US - hard)
• 프론트 암 포지션을 2mm 적용 가능한 프론트 서스팬션 암
• 프리미엄 그라파이트 재질로 만들어진 프론트 & 리어 쇽 타워 - 퀵 롤 센터 포지션 적용 과 쇽 포지션 위치 적용
• 강성을 그대로 유지한 울트라 로우 웨이트를 위한 프론트 쇽 타워
• 완벽한 밸런스를 위한 라이트 웨이트 중앙 알루미늄 layshaft 와 중앙 포지션된 스퍼기어
• 브러쉬리스 모터 시스템 최적으로 사용 가능
• 리튬폴리머 배터리 최적으로 사용가능

--------------------------------------------------------------------------------

http://artrc.net

XRAY XII - 1/12 PAN CAR

(ARTRC) — Mon, 22 Dec 2008 11:46:23 +0900

Main features:

XII Details:

All-new XII

XRAY’s new XII 1:12 pancar is the logical evolution of a conventional and proven design, with authentic 100% self-developed XRAY parts, designed and manufactured parts by XRAY in Europe. Specially designed and optimized for brushless and brushed motors, the high-competition design focuses on ultra-low weight, resulting in super-lightweight construction.
When it comes to the details and perfection, XRAY sets the standard and is unbeatable. The XII is nothing less than artistic craftsmanship.

Made in Europe

Legendary XRAY premium design, workmanship & material quality and unmatched attention to the finest details result in a state of perfection achieved by well thought-out refinements to create a car that is easy to drive, work on, and adjust. From unique HUDY Spring Steel™, through the world’s strongest Swiss 7075 T6 aluminum, along with XRAY’s own secret composite mixtures, to the premium high grade graphite materials… everything is exclusive and premium on the XII. Using premium European exclusive materials crafted by XRAY’s engineering artists using the state of the art German, Italian, and Swiss CNC machines, the XII is a blend of only the world’s finest.

Conventional and proven 1/12 platform

Starting with a conventional yet proven 1:12 platform, legendary RC designer and XRAY’s award-winning Chief Designer Ing. Hudy Juraj made simple yet smart changes to all aspects of the car… incorporating well thought-out details and unmatched precision of all small details.

Brushless optimized

The XII has a weight balance that is optimized when using brushless motors, though brushed motors are easily accommodated in the rear pod with a bit of shimming to compensate for their lighter weight.

Chassis

CNC-machined chassis is custom-manufactured from 2.0mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing. For extra-high grip carpet tracks, an optional stiff chassis will be available. Chassis layout is optimally designed to provide proper stiffness for excellent handling, while being flexible enough to generate best grip and traction. The super-narrow T-bar system chassis design and layout centralizes all weight along the centerline.

Narrow Chassis Design

Super-narrow chassis design and layout with all weight centralized along the centerline.

Front Chassis Protection

Composite front chassis protectors provide protection where the car needs it most… in the front corners of chassis where damage may occur from racing impacts.

Adjustable Body Posts

Robust body posts with fully-adjustable body holders; optional super fine +1 or +2mm body backstops available optionally for even more super-fine body height adjustment.

Premium Composite Parts

All composite parts are manufactured by XRAY using premium self-developed composite mixtures which guarantee appropriate flex of the suspension parts, while being hard enough to withstand hard impacts.

Front Suspension

Strong, simple, yet refined front suspension made from strong lightweight self-developed composite material. Reactive caster settings available using 2.5°, 5.0° or 7.5° eccentric bushings. Tiny yet strong HUDY Spring Steel™ pivotballs ensure smooth, bind-free operation. Fast & easy adjustment of front caster, track-width, roll center and ride height via included shims and clips.

Steering

Lightweight composite servo mounts with two different positions allow fitment of most popular micro and mid-size steering servos, and a tiny yet robust servo saver protects the servo from impact damage. Easy Ackermann adjustment is made via shims mounted below steering block pivotballs.

Adjustable Reactive Caster

Reactive caster is easily adjustable by using easy-to-change eccentric bushings of 2.5°, 5.0° or 7.5° (included). Reactive caster is used to adjust the amount of caster change when the front end of the car is compressing (diving) or decompressing (rising).

Front Brace

XRAY offers a choice of front braces to fine-tune the handling of your XII. A graphite front upper brace is provided as standard, with an aluminum adjustable front brace being available as an option.

Adjustable Ride Height

Ride height is easily adjustable using included front shims and eccentric rear axle bushings, as well as adjustable shock preload for middle ride height adjustment.

Kingpins

Super-smooth, hardened steel kingpins provide the foundation for the front suspension.

Wheel Axles

Ultra-precise wheel axles CNC-machined from premium HUDY Spring Steel™ are additionally hardened and hand ground for precision fitment.

Precision Pivot Balls

High-precision, HUDY Spring Steel™ pivot balls ensure super-fine movement of the front suspension.

Turnbuckles

Front upper 3mm adjustable HUDY Spring Steel™ camber turnbuckles are lightweight yet can withstand hard impacts, with precision threading to ensure fine camber adjustment. Steering linkages are made from adjustable 4mm turnbuckles manufactured from lightweight aluminum.

Optional Tweak-free Servo Mount

Optional Tweak-free Servo Mount Plate is available to ensure that the steering servo is mounted independently of the chassis and will not produce any unwanted chassis tweak. The set centrally mounts along the centerline of the chassis with the servo mounted independently on aluminum stands on the graphite servo mount plate. The Tweak-Free Servo Mount system is available in two sizes for either micro or mid-size servos.

Antenna Mount

A tiny lightweight antenna mount secures the lightweight yet strong molded fiberglass rollover antenna.

Battery Holder

Tiny, ultra-flat composite battery holders keep batteries secure and in place, with multiple front/rear placement options available for adjusting chassis weight balance.

Micro Shock Absorber

New XRAY micro shock has a scaled-down design from it’s “big brother” counterpart in XRAY’s successful T2 touring car platform. The fully-adjustable shock features an aluminum shock body that is hard-anodized for ultra durability. The fine-threaded shock body allows for quick and easy shock spring preload adjustment. Tiny thin shock membrane gives smooth dampening characteristics, and a super-soft silicone shock O-ring gives super-smooth operation while preventing oil leakage. The ultra-finely finished shock shaft with precise-molded composite shock piston ensures optimum shock oil flow and smooth shock absorber action. A simple yet smart shock construction allows for quick and easy shock-length adjustment for rear pod downstop adjustment.

Rear Suspension

The rear suspension features a conventional rear pod that is adjustable via fiberglass T-bar, providing extremely easy assembly and tuning while being very effective and give the highest competitive performance. A fiberglass T-bar is included for carpet and asphalt racing, while optional T-bars in different thickness are available for fine tuning. Unique T-bar mounting methods allow for two different settings: a simpler direct-mounting method for limited adjustment possibilities (recommended for beginners) or the pivotball mounting for more advanced adjustment possibilities (recommended for advanced drivers). Adjustable T-bar setscrews let you adjust for adjusting chassis tweak.

T-bar mounting

Two unique T-bar mounting methods allow for two different settings:
o Club race setting – direct mounting of T-bar to chassis without pivotballs gives limited adjustment possibilities (recommended for beginner drivers)
o Pro race setting – pivotball mounting of T-bar to chassis for more advanced adjustment possibilities (recommended for advanced drivers)

The T-bar features two different setscrew positions:
• FRONT HOLES: Effectively lengthens the T-bar, making it easier to drive and smoother but less responsive to driver input
• REAR HOLES: Effectively shortens the T-bar, making it more responsive to driver input.

1-piece Friction Plate Mounting

Special 1-piece aluminum damper pad holder is mounted independently from the rear body mount to ensure independent and equal left-right movement of the rear pod. Spring-loaded upper and lower friction plates provide addition control of rear pod movement; grease-retaining grooves in the plates ensure equal and consistent friction characteristics.

Rear Pod

The compact and ultra-lightweight rear pod is constructed from high-strength aluminum bulkheads, a rear aluminum brace, and thin but strong high-grade graphite plates. Side bulkheads are CNC-machined from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look. Strategic machining of the rear bulkheads reduces weight to a minimum while retaining strength. The smart pod design allows for super-easy motor top access, accommodating brushed or brushless motors. Eccentric composite bushings are included for ultra-fine rear ride height adjustment. Spring-loaded upper and lower damper pads provide addition control of rear pod movement, and grease-retaining grooves in the damper pads ensure equal and consistent friction characteristics.

Alu bulkheads

Rear pod bulkheads are CNC-machined from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look. The bulkheads are strategically machined to reduce weight to minimum while retaining strength.

Super-easy Motor Access

The open top design of the rear pod left-side bulkhead provides super-easy motor top access. The rear pod accommodates either brushed or brushless motors.

Rear Axle

The super-lightweight rear axle made from 1-piece high-grade graphite rod is additionally precision hand ground to eliminate vibration and run-out. The rear differential features high-grade precision carbide balls for spur gear, hardened and precision-ground D-steel shims, and premium carbide axial thrustbearing. Aluminum rear hubs are machined from lightweight aircraft aluminum, specially lightened and hard-anodized for extra durability, and additionally black coated for stylish looks. Precision-molded spur gear made from XRAY's exclusive composite material, ensuring true running, super-quiet operation, and robustness for handling powerful motors.

Alu Rear Hubs

Aluminum rear hubs are machined from lightweight aircraft aluminum, specially lightened and black-coated for stylish looks. The rear left aluminum wheel hub features a center-balanced clamping mounting system, ensuring secure mounting while eliminating vibration and run-out.

Fully Adjustable

Fully adjustable front camber, caster, and toe; front & rear track-width, front & rear ride height, front & rear springs, rear shock absorber, rear downstop, T-bar stiffness, pod damping, battery position, pod weight balance, and chassis tweak.

The XII is one of the most adjustable 1/12 pan car in the world. Whether you are a hardcore racing fanatic or a club-level sportsman, you can very easily adjust the XII to suit your racing style, the race track, and all track conditions. The XII features the XRAY Set-up Book with 16 pages of high-quality 3D pictures and easy-to-read and understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your XII.

Chassis Weight Balance Adjustment

Chassis and rear pod features pre-drilled centerline holes for optimum weight balance adjustment using HUDY Balancing Tool #107880.

XRAY Instruction Manual

XRAY Instruction Manuals have become the industry standard, and are simply the best manuals you will ever get with an RC model car. Whether you are a first-time builder or an experienced racer, all the instructions are straight-forward and easy to understand. The full-colour instruction manual contains large 3D illustrations for easy comprehension.

XRAY’s VIP Customer Treatment

Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car, but you will also become a member of the prestigious family of XRAY owners with superb support and service from the XRAY factory. The XRAY Web portal features up-to-date racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY support forum. You can even upload your own set-up sheets or download from the largest RC set-up database at the exclusive XRAY Virtual Set-up Sheet Database. And that is only the start of the VIP treatment you get by joining Team XRAY.

Dimensions
Class:	1/12 electric pancar
Width:	Adjustable 166 mm front, 169 mm rear
Length:	264 mm (varies depending on rear tires used)
Wheelbase:	196 mm +/-0.5mm
Weight:	202 g
Ready-to-run weight:	840 g – 4cells incl. BL system
Chassis
Chassis:	2.0mm carbon fiber, 4-cell, CNC machined
T-bar:	Super-narrow fiberglass T-bar on pivot balls, adjustable tweak and stiffness
Brace:	Graphite front brace, optional alu. adjustable brace
Body:	not included, uses 1/12 pancar type
Drivetrain
Type:	2WD direct drive to rear axle
Rear Axle:	Graphite shaft with ball differential
Primary:	pinion/spur 64P
Bearings:	High-speed ball-bearings (10)
Suspension
Front:	Spring-supported, kingpin-style front suspension with composite upper & lower suspension arms and steering blocks
Rear:	Articulating rear motor pod attached to pivot ball-supported T-bar, controlled by rear shock absorber and friction damper plates
Rear Shock:	Central oil-filled, coil-over micro shock absorber
Geometry
Ride Height:	Adjustable front + rear
Camber:	Adjustable front
Front Caster (Static):	1–14.5° static adjustable static caster
Front Caster (Reactive):	2.5–7.5° adjustable reactive caster
Track-width:	Adjustable front + rear
Toe:	Adjustable front
Downstop:	Adjustable rear
Ackermann:	Adjustable with shims
Steering:	Direct linkage between steering servo saver and steering blocks
Balance:	Front/rear weight balance adjustable via battery position
Other
Wheels:	not included
Tires:	not included
Instructions:	Full-color manual with 3D graphics (28 pages)
Set-up book:	2-color set-up book (16 pages)
Packaging:	Carton box with vinyl bags with parts
Additionally included:	HUDY Diff Grease, Authentication Certificate, set-up sheet, parts list & exploded view, decals, shock oil
Not included:	Radio system (transmitter and receiver), steering servo, motor (brushless or brushed, pinion gear, battery pack (4-cell saddlepack), speed controller, charger, 1/12-scale bodyshell, wheels, tires, high-strength fibre tape, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock, tire truer, tools

Download

XRAY XII Instruction Manual

Download the new XRAY XII Instruction Manual. This full-color 28-page publication with 3D graphics is a perfect guide for building your new XII quickly and easily.

XRAY XII Instruction Manual (pdf) - English Size: 4342 (kb)

XRAY XII Set-up Book

Download the new XRAY XII Set-Up Book. This 2-color 16-page publication is a complete source of extensive knowledge about your new XII, including information about all adjustment possibilities, tricks and tips.

XRAY XII Set-up Book (pdf) - English Size: 1138 (kb)

XRAY XII Exploded View

Download the exploded view with all XRAY XII spare parts.

XRAY XII Exploded View (pdf) - English Size: 871 (kb)

XRAY XII Parts List

Download the PDF parts list and option part list for your XII.

XRAY XII Parts List (pdf) - English Size: 30 (kb)

XRAY XII Blank Setup Sheet

Download the high resolution modifiable-pdf blank set-up sheet to record your set-up. "These files are readable in Acrobat Reader 4.0 and higher."

XRAY XII Blank Setup Sheet (pdf) - English Size: 454 (kb)

XRAY XII Modifiable-PDF Blank Setup Sheet

Download the high resolution modifiable-pdf blank set-up sheet to record your set-up. "These files are readable in Acrobat Reader 4.0 and higher."

XRAY XII Modifiable-PDF Blank Setup Sheet (pdf) - English Size: 706 (kb)

XRAY XII Carpet Basic Setup Sheet

Download the high resolution modifiable-pdf EU Carpet Rubber-Spec basic set-up sheet to record your set-up. "These files are readable in Acrobat Reader 4.0 and higher."

XRAY XII Carpet Basic Setup Sheet (pdf) - English Size: 467 (kb)

--------------------------------------------------------------------------------

http://artrc.net

CUBE 1/12 Upgrade Foam Tires

(ARTRC) — Tue, 16 Dec 2008 14:46:44 +0900

CUBE 1/12 Upgrade Foam Tires

All CUBE foam tires are produced with high quality premium foam providing the best grip during the race.

Available with Soft, Medium and Hard type.

C44 0001 1/12 Upgrade Foam Tires - Front Soft (35)

C44 0002 1/12 Upgrade Foam Tires - Front Medium (40)

C44 0003 1/12 Upgrade Foam Tires - Front Hard (45)

C44 0011 1/12 Upgrade Foam Tires - Rear Soft (30)

C44 0012 1/12 Upgrade Foam Tires - Rear Medium (35)

XRAY T2R PRO - 1/10 ELECTRIC TC - HIGH COMPETITION

(ARTRC) — Tue, 16 Dec 2008 11:35:52 +0900

T2R PRO main features:

• Based on the ultra-successful, award-winning, and racing-dominating XRAY T2’008 & T2’009 platforms
• Competition racing design featuring well-proven suspension geometry, drivetrain, and parts — the whole racing platform of T2 cars!
• Majority of the parts being fully compatible and interchangeable among other T2 Based cars
• LiPo-ready with unique pads that raise the top deck to fit popular-sized LiPo battery packs
• Ultra-lightweight front and rear split bulkheads are CNC-machined from Swiss 7075 T6 aluminum, allowing super-easy diff and layshaft access
• New super-light Swiss 7075 T6 aluminum front & rear drive shafts
• Extra-durable drive axles manufactured from premium Hudy Spring Steel™
• T2 dual-belt drive train featuring 34T/20T pulleys and premium-quality, Kevlar? reinforced drive belts
• Designed to meet ROAR, EFRA, and FEMCA regulations
• 6-cell chassis design allows use of either 5- and 6-cell battery NiMH packs, or LiPo pack
• Chassis and top deck design carried over from the latest XRAY T2’009, CNC-machined from strong yet flexible fiberglass; provides unique handling characteristics to make the car super fast yet super easy to drive
• Specially-designed top deck provides extra torsion and flex to generate dependable grip
• High-quality composite rear ball differential featuring balls for super-smooth runs
• Super-light composite front Solid Axle with XRAY’s own smart quick-change outdrive system for easy outdrive exchange; no servicing or replacement of drive shaft blades needed, translates into reduced servicing costs
• Centrally-positioned layshaft and split bulkheads provide optimum balance thanks to perfect weight distribution of the motor towards the centerline, giving quicker left-right transitions
• Motor mount bulkhead features the lowest possible motor mount position, compatible with stock, modified, and brushless motors

Adjustment Possibilities:

T2R PRO Details:

XRAY T2R PRO platform

Since the release of the first T1 in 2001, XRAY has become synonymous with quality, workmanship, performance, and luxury in the RC world. With countless victories and national titles from all around the world — including 20x US National Champion, 3x European Junior Champion and multiple European Vice-Champion — XRAY touring cars have become the world’s favorite touring car as voted in the Reader’s Choice Awards and multiple Car of the Year Awards. Over the years, XRAY’s Engineering Department has continued its ongoing development, bringing with it a fresh new version of its touring car platform, always superseding and improving upon its predecessors.

New XRAY T2R PRO

Based on the highly successful T2’008 platform, XRAY now presents the improved, refined, and optimized XRAY T2R PRO.

The T2R PRO carries over many of the features from the coveted T2’008 and new T2’009, loading in all of the latest parts and products supporting the car’s high-performance nature to gain a distinct edge in the highly-competitive spectrum of foam- and rubber-tire racing.

Designed for the racer on a budget, the T2R PRO is the best car on the market.

LiPo & Brushless Optimized & Ready

Optimized for racers competing at all the levels of racing — whether it be national, regional, or local club racing — the T2R PRO suits all popular motors and batteries. Whether you use NiMH 5- or 6-cell battery packs or popular LiPo battery packs, the chassis will accommodate them easily. High-performance brushless motors or brushed stock motors fit easily on the motor mount. All modern and popular electronics are easily accommodated.

LiPo Pads

The stock T2R PRO is designed to accommodate popular 24mm-high LiPo packs with the use of special fiberglass LiPo pads that are inserted between the top deck and bulkheads to raise the top deck by 2.3mm.

Due to continuous development of LiPo batteries, XRAY cannot guarantee that all LiPo packs will fit due to the fact that there are currently no sizing rules for LiPo pack dimensions.

Optimized Drivetrain

When it comes to drivetrain performance, everything is optimized and perfect in the T2R PRO; drivetrain ratio, diffs, pulleys, drive shafts, belts, and other components were taken from the new T2’009 to provide the overall highest drivetrain performance.

With the current trend of high development in the electric motor industry, the drivetrain has been optimized to work efficiently with all most popular motors: stock, modified, and brushless motors. As such the T2R PRO comes a front 34T front solid axle, 34T rear ball differential, and large 20T center layshaft pulleys.

New Swiss 7075 T6 Aluminum Drive Shafts

The rotating mass of the drivetrain was reduced and optimized with high-competition performance in mind. The T2R PRO features lightweight front & rear aluminum drive shafts machined from premium Swiss 7075 T6. Optional hard-anodized black-coated alu drive shafts or the legendary robust HUDY Spring Steel™ drive shafts are optionally available.

HUDY Spring Steel™ Drive Axles

For guaranteed reliability, ultra-strong HUDY Spring Steel™ drive axles are used at front and rear to withstand even the most extreme impacts. The drive axles are additionally hand ground for perfect fit.

Lightweight Composite XRAY Solid Axle

Rotating mass is one of the most significant influences on the performance of an RC racecar. From the great successes of the T2’008 and T2’009, the T2R PRO features the unique lightweight composite XRAY Front Solid Axle. The Front Solid Axle has a very stiff structure and ultra-light weight that was achieved by molding the entire solid axle from XRAY’s own self-formulated composite material.

Outdrives are fully exchangeable which allows very easy and comfortable servicing, while the unique drive shaft connection — eliminating the former drive shaft blades — enables direct power transfer to the axle and eliminates play between the drive shaft and outdrives, improving steering precision and increasing overall steering.

Composite XRAY Ball Differential

The T2R PRO features a high-competition, super-smooth rear ball differential molded from strong, lightweight composite material for extra strength and long life. The ball differential features lightened 34T pulleys with special "side click-covers". Internal components include a high-quality balls and shims for smooth operation, and ultra-smooth running.

Ultra-lightweight Aluminum Bulkheads

The ultra-lightweight bulkheads have been carried over from the T2’008 and T2’009 and are a work of engineering art, where luxury meets simplicity and practicality. The bulkheads are CNC-machined from premium Swiss 7075 T6 aluminum and are strategically machined to provide the lightest possible skeletal support framework for the car. Thanks to the ultra-low platform it was possible to create the lowest, smallest, and lightest bulkheads ever.

The rear bulkheads feature a split design, allowing the rear suspension to be mounted to separate bulkheads while the center layshaft sits on its own super-narrow bulkheads that are positioned closer to the center of the chassis. XRAY’s legendary attention to detail is noticeable in all the precisely chamfered edges. The split design of the bulkheads also enables super-easy access to front and rear differentials and the middle layshaft. Exchanging diffs and spur gear is super quick and easy.

As with previous XRAY cars, both front and rear bulkheads feature integrated belt-tension adjustment through the use of adjustable bearing eccentric holders, eliminating the need for a separate belt tensioner. All ball-bearings are mounted in composite hubs to reduce friction and improve drivetrain efficiency.

XRAY’s attention to the detail and perfection is evident with their TQM (Total Quality Management) approach. Not only are all bulkheads inspected during the production process, but they are also pre-mounted to the chassis by expertly trained staff to verify that the car’s “backbone” has been perfectly manufactured. So when you open the box, you will see and appreciate the beauty.

Fiberglass Chassis & Top Deck

The chassis and top deck feature same design and layout as the T2’009, making both platforms compatible. Both the chassis and top deck are CNC machined from strong yet flexible black fiberglass. The super-narrow and long design gives dependable torsion and flex, reducing unwanted tweak from impacts.

Top Deck Mount

The center top deck mount is used for rubber-tire carpet racing which permits decreased front suspension traction and eliminates front tire overheating, ensuring consistent handling throughout an entire run. The center top deck mount can be easily mounted or removed depending on your particular racing conditions.

Front Bulkhead Reinforcement Legs

The front bulkheads were specially designed to allow adjustment of front chassis flex for different racing conditions. The lower part of the front bulkheads features reinforcement legs which can be easily connected to the chassis (via 2 extra screws) which influences the front flex of the chassis; removing the screws from the reinforcement legs allows additional chassis flex.

Diff Height Adjustment

Both front and rear bulkheads feature independent diff height adjustment. By rotating the diff eccentric holders, the height of the diff can be adjusted by 1mm. Optional eccentric holders with 2mm offset are available.

Kevlar? Drive Belts

The 2-belt 4WD drivetrain concept provides maximum efficiency and highest performance using Kevlar?-reinforced drive belts for ultra-high durability. Narrow (3mm) front and rear drive belts have been specially ground for minimum thickness and flexibility.

Centrally-positioned Layshaft

The middle layshaft is strategically positioned towards the center of the chassis on separate, super-narrow middle layshaft bulkheads positioned along the chassis centerline. The middle drive pulleys are positioned along side of the main spur gear and as such the drivetrain energy is transmitted from the motor through the centrally-positioned spur gear to both middle layshaft pulleys… ensuring maximum balance of the car.

Alu Middle Layshaft

The aluminum layshaft is machined from highest-grade aluminum to minimize rotating weight without compromising strength or integrity. The layshaft is perfectly round with zero runout, eliminating drivetrain vibration and producing a positive balance. Composite pulleys are keyed to the layshaft.

Proven Suspension Geometry

From the narrow arms, through the tiny front and rear suspension blocks, to the small and robust steering blocks… every suspension part has been specially designed and optimized to provide responsive racing characteristics in all racing conditions. Over the years XRAY has successfully gained and utilized extensive suspension geometry knowledge and self-developed suspension stiffness technology, which have been utilized when designing suspension parts. The ultra-lightweight suspension parts are molded from a special composite material that makes the parts very light yet very durable to withstand the rigors of high-performance racing.

The T2R PRO features optimized suspension parts carried over from the T2’008 and T2’009. The arms feature a single optimized shock mounting position and integrated anti-roll bar mounts. The rear arms feature two anti-roll bar mounts for super-fine adjustment of the anti-roll bar.

The T2R PRO features standard hard composite mixture arms (marked “H”). The front suspension arms allow 2mm adjustment of front arm position.

C-hubs

The T2R PRO C-hubs are moulded from medium composite mixture (marked “M”) and feature 4° integrated caster.
Optional 2° and 6° C-hubs are available either in composite or aluminum for ultra-high grip racing conditions.

Rear Uprights

The rear uprights feature built-in 1° toe-in to ensure stability. Two different roll center positions are available on the rear uprights, and more roll center positions can be easily adjusted by adding shims between the upright and the turnbuckle ball-joint.

Small but robust 5x10x4 ball-bearings minimize unsprung weight.

The T2R PRO uprights are moulded from hard hardness (marked “H”) composite material.

Steering Blocks

Small yet robust steering blocks each feature two Ackermann positions, and use small but robust 5x10 ball-bearings to minimize unsprung weight. The steering blocks are moulded from the medium hardness composite material (marked “M”).

XRAY Quick Roll-Centers™

XRAY’s self-developed Quick Roll-Centers™ make setup quick & easy. The front and rear shock towers feature pre-set optimized roll center positions. Using the eccentric aluminum roll center holders you can easily choose one of 4 quick roll-center positions on the front shock tower. The rear shock tower features two extra positions, making a total of 6 different quick roll-center positions. Easy, smart, quick.

The extra positions for Quick Roll-Center™ positions allow the entire rear upper link to be positioned higher for improved cornering speeds in long sweepers on open tracks.

Fiberglass Shock Towers

The super-low front and rear shock towers are CNC-machined from extra thick 3mm fiberglass material to provide maximum strength and long life, and the lower height allows the shocks to be mounted lower thus making the CG lower. The front shock tower was specially machined for ultra-low weight without compromising strength.

The shock towers feature optimized shock mounting positions for XRAY’s short shock absorbers, and the feature different positions for Quick Roll Center™ settings. The all-in-one shock towers are optimized for use with either rubber or foam tires.

Short XRAY Racing Shocks

The T2R PRO features the same race-proven, externally adjustable XRAY racing shocks used on all other T2 cars. The short shock bodies and shock rods were designed for improved suspension lift and lower CG.

The XRAY externally adjustable racing shocks allow quick & easy damping adjustment to up to 4 different damping settings without disassembly. The threaded shock bodies enable easy and fine ride height adjustment. The shocks also feature foam membrane inserts for smoother shock operation. Shock rods are specially hardened to guarantee long life and maximum strength.

Low-CG Touring Car Platform

The ultra-low touring car platform of the T2’008 has been carried over to the T2R PRO to provide the lowest CG ever.

Narrow Chassis

The overall ultra-narrow chassis platform was made possible thanks to ultra-narrow positioning of middle layshaft bulkheads along the centerline of the chassis. All electronics are positioned close to the chassis centerline, improving weight transition during quick direction changes in racing.

XRAY Quick-Saver™

The hugely-successful XRAY Quick-Saver™ has been carried from the T2’008, it being another innovation from the design boards of XRAY’s Engineering Department. Thanks to the fully-adjustable Quick-Saver™, in a matter of seconds you can change the steering characteristics by adjusting the servo saver to one of 5 preset Ackermann positions. The servo saver comes factory pre-built, guaranteeing exceptionally smooth, responsive, and precise steering. The alloy central shaft features a pre-installed strong preload spring.

Adjustable Steering Bell-crank

The adjustable-position steering bell-crank can also used to change the steering Ackermann setting. By turning a pair of composite eccentric bushings in the chassis and top deck, you can move the complete assembly forward or backward. This adjustment is in addition to the five Quick-Saver™ Ackermann positions. The bell-crank is supported by two ball-bearings.

Precision Spur Gears

Precision-molded spur gears are made from XRAY's exclusive secret blend of composite material, allowing the gear to run true and super quiet, yet be robust enough to handle low-wind modified motors or brushless motors. The spur gears are strategically designed to have the lowest possible weight while staying strong and light. Each gear is stamped with the tooth number for easy identification. The T2R PRO features an 84T 48-pitch spur gear.

Premium Ball-Bearings

• Fully ball-bearing equipped; 18 bearings in the kit
• High-speed, blue-sealed ball-bearings throughout the drivetrain for maximum efficiency
• Highest-tolerance, maximum-performance bearings
• Small-size ball-bearings used in steering blocks and uprights reduce unsprung weight
• Ball-bearings are degreased and lightly oiled with Aero Shell? Fluid 12 for maximum smoothness and long life

Suspension Holders

The T2R PRO uses the same smart suspension holders as the rest of the T2 platform. Aluminum inserts in the composite holders guarantee that geometry and setup will not change and will be retained even after hard impacts.

There are 3 different suspension composite holders that enable easy roll center setup. The standard suspension holder gives a 0mm roll center, while two eccentric suspension holders raise or lower the roll center by 0.75mm.

Smart XRAY geometry uses variable-thickness shims between the bulkheads and suspension holders to enable easy rear toe-in adjustment. You can also easily remove the shims to narrow the suspension, and then add wheel offset shims to reclaim track-width.

Hex Hubs

Ultra-strong wheel hex drive hubs are molded from ultra-hard composite material. These ultra-true hex hubs provide wobble-free wheel mounting. Optional aluminum offset wheel hexes are available (-0.75, 0mm, +0.75, +1.5mm).

Shock Pistons

XRAY keyed shock pistons can be used to make adjustable or non-adjustable shocks. Along with the 2-piece adjustable shock pistons, 3 different non-adjustable pistons are also included.

XRAY Racing Springs

The T2R PRO shocks are equipped with silver and gold racing springs optimized for T2R PRO handling. As with all other XRAY springs, these springs were manually measured and selected to guarantee precisely equal length and damping characteristics.

XRAY Selected Springs

For additional tuning, XRAY offers complete sets of ultimate shock springs. XRAY self-developed and manufactured ultimate racing springs are manually selected for maximum precision, equal length, and equal damping characteristics. Available separately or as ultimate sets (#308390 and #308380) along with the new line of black-coated, laser-engraved springs.

Body Posts

Beefy 6mm thick body posts are made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard impacts or roll overs. The body supports are rounded to have a better fit and provide better support to the car body.

For ultimate tuning and adjustment, XRAY offers optional body height adjustable body posts that allow independent front & rear body height adjustment by +1mm or +2mm.

Front Bumper

The compact front foam bumper is manufactured from lightweight, high-resilience foam. The impact-absorbing lower composite bumper and upper bumper holder are molded from rigid composite material to withstand hard impacts.

An optional stiffer foam bumper is available (#301223) as well as an optional graphite CNC-machined front upper bumper holder (#301213).

Adjustment Possibilities

The extensive and impressive range of adjustment possibilities includes: caster, camber, toe, anti-dive, anti-squat, ride height, downstops, track-width, roll center, Quick Roll Center™, wheelbase, Ackermann, belt-tension adjustment, chassis and top deck flex, 4 step adjustable shocks, and adjustable rear diff.

Chassis Balance

Chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool #107880.

Premium HUDY Grease

The T2R PRO includes premium HUDY Diff grease.

HUDY Diff Grease is a high-performance, model racing car general-purpose silicone-based grease, formulated to provide extra protection against wear, corrosion, and water. HUDY Diff Grease is recommended for most types of rotating and moving parts in any RC car. This silicone grease is especially well-suited for use in ball differentials, axial (thrust) bearings, and in any other ball-bearings that require grease. Recommended for use in any heavy-duty application where high pressures or loads are present. This grease provides excellent protection against rust and corrosion while resisting water wash-out, making it particularly suitable for racing in wet conditions. The silicone grease operates within a large temperature range and will work in all extreme conditions up to and over 100°C.

Optional Battery Holder

Being a high-competition racing car, the T2R PRO uses tape to hold the batteries to the chassis to reduce unnecessary weight. HUDY Fiber-Reinforced Tape #107870 is recommended by the Team XRAY factory racing team for high-competition racing.

The chassis also features holes for an optional graphite battery strap for 6-cell battery pack (#306163) that features the XRAY Smart Battery Holder System™. A captured aluminum wheel enables you to easily secure the battery strap without clips. Easy, smart, quick.

The race-oriented XRAY battery holder was designed to ensure that it won't affect chassis tweak even if you tighten the capture wheel excessively.

XRAY Set-up Book

The T2R PRO is one of the most adjustable electric touring car in the world. Whether you are a hardcore racing fanatic or a club-level sportsman, you can very easily adjust the T2R PRO to suit your racing style, the race track, and all track conditions. The T2R PRO features the bestselling XRAY Set-up Book with more than 50 pages of high-quality pictures and easy-to-read and understand RC car set-up explanations. Whether you are a novice driver or an experienced racer, you can easily learn many set-up tips & tricks and improve your set-up skills, ultimately translating into improved racing performance with your T2R PRO.

XRAY Instruction Manual

XRAY Instruction Manuals have become the industry standard, being simply the best manuals you will ever get with an RC model car. Whether you are a first-time builder or an experienced racer, all the instructions are straight-forward and easy to understand. The instruction manual contains large 3D illustrations that show all assembly details in the clearest possible way.

XRAY VIP Customer Treatment

Owning an XRAY model racing car is an experience on its own. Not only will you own the most premium luxury model racing car in the world, but you will also become a member of the prestigious family of XRAY owners with direct support and service from the XRAY factory. XRAY brings you the most up-to-date RC Web site on the Internet, with daily racing news and latest product developments. If you have any questions, problems or comments, you can ask the XRAY Support Team or any XRAY Factory Team Driver on the XRAY Support Forum. You can even upload your own set-up sheets or download from the thousands of different set-up sheets available from all around the world at the exclusive XRAY Virtual Set-up Sheet Database, the world’s largest set-up sheet database. And that is only the start of the VIP treatment you get by joining Team XRAY.

XRAY T2'009 & T2R PRO & XII & 808 다음주 입고예정

(ARTRC) — Tue, 16 Dec 2008 11:07:07 +0900

XRAY T2'009 & T2R PRO & XII & 808 다음주 입고예정

XRAY T2'009 & T2R PRO & XII & 808 가 다음주 월~수요일에 입고 될 예정입니다.

이미 많은 분들이 T2'009 & T2R PRO & XII & 808 키트에 대하여 예약을 하셔서 물량이 조기품절될 수 있으니 키트구매를 하실 분들은 미리 이용하시는 과학사 및 소매점에 키트 예약을 부탁드리겠습니다.

감사합니다.

수입처: 진호코리아 http://pitwork.co.kr
서울 서초구 양재동 281-5 송원빌딩 1층

--------------------------------------------------------------------------------

http://artrc.net